Get Update NSE7_EFW-6.4 Practice Exam To Pass Fortinet NSE 7 - Enterprise Firewall 6.4 Exam

Get Update NSE7_EFW-6.4 Practice Exam To Pass Fortinet NSE 7 – Enterprise Firewall 6.4 Exam

test2022-06-20T03:55:55+00:00

If you want to get NSE7_EFW-6.4 Fortinet NSE 7 – Enterprise Firewall 6.4 certification and boost your career , you should pass NSE7_EFW-6.4 exam. FreeTestShare offers the most update NSE7_EFW-6.4 Practice Exam with actual exam questions and answers to help you know the exam topics and layout. NSE7_EFW-6.4 Practice Exam includes real questions and answers, which have been corrected and updated to ensure that they are true and valid. You will be able to pass the Fortinet NSE7_EFW-6.4 exam with flying colors if you use our practice questions and answers.

Now is the time to put your skills to the test with these online NSE7_EFW-6.4 practice exams!

Page 1 of 3

1. View the exhibit, which contains the output of diagnose sys session list, and then answer the question below.

If the HA ID for the primary unit is zero (0), which statement is correct regarding the output?

This session is for HA heartbeat traffic.

This session is synced with the slave unit.

The inspection of this session has been offloaded to the slave unit.

This session cannot be synced with the slave unit.

2. An LDAP user cannot authenticate against a FortiGate device.

Examine the real time debug output shown in the exhibit when the user attempted the authentication; then answer the question below.

Based on the output in the exhibit, what can cause this authentication problem?

User student is not found in the LDAP server.

User student is using a wrong password.

The FortiGate has been configured with the wrong password for the LDAP administrator.

The FortiGate has been configured with the wrong authentication schema.

3. Which two statements about FortiManager is true when it is deployed as a local FDS? (Choose two.)

It caches available firmware updates for unmanaged devices.

It can be configured as an update server, or a rating server, but not both.

It supports rating requests from both managed and unmanaged devices.

It provides VM license validation services.

4. Examine the following partial outputs from two routing debug commands; then answer the question below:

Why the default route using port2 is not displayed in the output of the second command?

It has a lower priority than the default route using port1.

It has a higher priority than the default route using port1.

It has a higher distance than the default route using port1.

It is disabled in the FortiGate configuration.

5. Examine the following partial output from two system debug commands; then answer the question below.

Which of the following statements are true regarding the above outputs? (Choose two.)

The unit is running a 32-bit FortiOS

The unit is in kernel conserve mode

The Cached value is always the Active value plus the Inactive value

Kernel indirectly accesses the low memory (LowTotal) through memory paging

6. An administrator added the following Ipsec VPN to a FortiGate configuration:

configvpn ipsec phasel -interface

edit "RemoteSite"

set type dynamic

set interface "portl"

set mode main

set psksecret ENC LCVkCiK2E2PhVUzZe

next

end

config vpn ipsec phase2-interface

edit "RemoteSite"

set phasel name "RemoteSite"

set proposal 3des-sha256

next

end

However, the phase 1 negotiation is failing. The administrator executed the IKF real time debug while attempting the Ipsec connection.

The output is shown in the exhibit.

What is causing the IPsec problem in the phase 1?

The incoming IPsec connection is matching the wrong VPN configuration

The phrase-1 mode must be changed to aggressive

The pre-shared key is wrong

NAT-T settings do not match

7. View the exhibit, which contains the output of a debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

In the network on port4, two OSPF routers are down.

Port4 is connected to the OSPF backbone area.

The local FortiGate’s OSPF router ID is 0.0.0.4

The local FortiGate has been elected as the OSPF backup designated router.

8. View the exhibit, which contains the output of a BGP debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

The local router's BGP state is Established with the 10.125.0.60 peer.

Since the counters were last reset; the 10.200.3.1 peer has never been down.

The local router has received a total of three BGP prefixes from all peers.

The local router has not established a TCP session with 100.64.3.1.

9. Which statement is true regarding File description (FD) conserve mode?

IPS inspection is affected when FortiGate enters FD conserve mode.

A FortiGate enters FD conserve mode when the amount of available description is less than 5%.

FD conserve mode affects all daemons running on the device.

Restarting the WAD process is required to leave FD conserve mode.

10. View the exhibit, which contains the output of a diagnose command, and then answer the question below.

What statements are correct regarding the output? (Choose two.)

This is an expected session created by a session helper.

Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.0.1.10.

Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.200.1.1.

This is an expected session created by an application control profile.

Page 2 of 3

11. View the exhibit, which contains the output of a real-time debug, and then answer the question below.

Which of the following statements is true regarding this output? (Choose two.)

This web request was inspected using the root web filter profile.

FortiGate found the requested URL in its local cache.

The requested URL belongs to category ID 52.

The web request was allowed by FortiGate.

12. When using the SSL certificate inspection method for HTTPS traffic, how does FortiGate filter web requests when the browser client does not provide the server name indication (SNI) extension?

FortiGate uses CN information from the Subject field in the server’s certificate.

FortiGate switches to the full SSL inspection method to decrypt the data.

FortiGate blocks the request without any further inspection.

FortiGate uses the requested URL from the user’s web browser.

13. View the exhibit, which contains a session entry, and then answer the question below.

Which statement is correct regarding this session?

It is an ICMP session from 10.1.10.10 to 10.200.1.1.

It is an ICMP session from 10.1.10.10 to 10.200.5.1.

It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.

It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.

14. View the global IPS configuration, and then answer the question below.

Which of the following statements is true regarding this configuration?

IPS will scan every byte in every session.

FortiGate will spawn IPS engine instances based on the system load.

New packets will be passed through without inspection if the IPS socket buffer runs out of memory.

IPS will use the faster matching algorithm which is only available for units with more than 4 GB memory.

15. A FortiGate device has the following LDAP configuration:

The administrator executed the ‘dsquery’ command in the Windows LDAp server 10.0.1.10, and got the following output:

>dsquery user Csamid administrator

“CN=Administrator, CN=Users, DC=trainingAD, DC=training, DC=lab”

Based on the output, what FortiGate LDAP setting is configured incorrectly?

cnid.

username.

password.

dn.

16. Refer to the exhibit, which shows the output of a debug command.

Which two statements about the output are true? (Choose two.)

The local FortiGate OSPF router ID is 0.0.0.4.

Port4 is connected to the OSPF backbone area.

In the network connected to port4, two OSPF routers are down.

The local FortiGate is the backup designated router.

17. How does FortiManager handle FortiGuard requests from FortiGate devices, when it is configured as a local FDS?

FortiManager can download and maintain local copies of FortiGuard databases.

FortiManager supports only FortiGuard push to managed devices.

FortiManager will respond to update requests only if they originate from a managed device.

FortiManager does not support rating requests.

18. View the exhibit, which contains a partial output of an IKE real-time debug, and then answer the question below.

Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?

auto-discovery-sender

auto-discovery-forwarder

auto-discovery-shortcut

auto-discovery-receiver

19. Which two statements about OCVPN are true? (Choose two.)

Only root vdom supports OCVP

OCVPN supports static and dynamic IPs in WAN interface.

OCVPN offers only Hub-Spoke VPNs.

FortiGate devices under different FortiCare accounts can be used to form OCVP

20. Refer to the exhibit, which contains the output of a BGP debug command.

Which statement about the exhibit is true?

The local router has received a total of three BGP prefixes from all peers.

The local router has not established a TCP session with 100.64.3.1.

Since the counters were last reset, the 10.200.3.1 peer has never been down.

The local router BGP state is OpenConfirm with the 10.127.0.75 peer.

Page 3 of 3

21. An administrator has decreased all the TCP session timers to optimize the FortiGate memory usage. However, after the changes, one network application started to have problems. During the troubleshooting, the administrator noticed that the FortiGate deletes the sessions after the clients send the SYN packets, and before the arrival of the SYN/ACKs. When the SYN/ACK packets arrive to the FortiGate, the unit has already deleted the respective sessions .

Which TCP session timer must be increased to fix this problem?

TCP half open.

TCP half close.

TCP time wait.

TCP session time to live.

22. An administrator wants to capture ESP traffic between two FortiGates using the built-in sniffer.

If the administrator knows that there is no NAT device located between both FortiGates, what command should the administrator execute?

diagnose sniffer packet any ‘udp port 500’

diagnose sniffer packet any ‘udp port 4500’

diagnose sniffer packet any ‘esp’

diagnose sniffer packet any ‘udp port 500 or udp port 4500’

23. Refer to the exhibit, which contains the debug output of diagnose dvm device list.

Which two statements about the output shown in the exhibit are correct? (Choose two.)

ADOMs are disabled on the FortiManager

The FortiGate configuration is in sync with latest running revision history.

There are pending device-level changes yet to be installed on Local-FortiGate.

The policy package has been modified for Local-FortiGate.

24. View the exhibit, which contains the partial output of a diagnose command, and then answer the question below.

Based on the output, which of the following statements is correct?

Anti-reply is enabled.

DPD is disabled.

Quick mode selectors are disabled.

Remote gateway IP is 10.200.5.1.

25. View the exhibit, which contains the output of a diagnose command, and then answer the question below.

Which statements are true regarding the output in the exhibit? (Choose two.)

FortiGate will probe 121.111.236.179 every fifteen minutes for a response.

Servers with the D flag are considered to be down.

Servers with a negative TZ value are experiencing a service outage.

FortiGate used 209.222.147.3 as the initial server to validate its contract.

26. View the exhibit, which contains the output of a debug command, and then answer the question below.

What statement is correct about this FortiGate?

It is currently in system conserve mode because of high CPU usage.

It is currently in FD conserve mode.

It is currently in kernel conserve mode because of high memory usage.

It is currently in system conserve mode because of high memory usage.

27. Which statement about memory conserve mode is true?

A FortiGate exits conserve mode when the configured memory use threshold reaches yellow.

A FortiGate starts dropping all the new and old sessions when the configured memory use threshold reaches extreme.

A FortiGate starts dropping new sessions when the configured memory use threshold reaches red

A FortiGate enters conserve mode when the configured memory use threshold reaches red

28. Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)

Installing configuration changes to managed devices

Importing interface mappings from managed devices

Adding devices to FortiManager

Previewing pending configuration changes for managed devices

29. An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link .

What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)

Router I

OSPF interface area.

OSPF interface cost.

OSPF interface MT

Interface subnet mask.