Gain Your NCSIE ONTAP Certification With Free NS0-184 Exam Questions

test2022-03-26T03:30:53+00:00

The latest NS0-184 exam questions are new updated for your NCSIE ONTAP Certification. The NetApp Certified Storage Installation Engineer, ONTAP exam includes 60 test questions, with an allotted time of 1-1/2 hours to complete. We have updated NS0-184 sample test to include practice exam questions and answers to assist you in preparing for the NS0-184 exam and get your desired certification.We provide free access to the most recent NS0-184 exam questions and answers. You can practice the most recent NS0-184 exam questions online!

Choose the latest NS0-184 practice exam and put yourself to the test right now!

Page 1 of 8

1. Which technology allows NetApp to ship replacements for defective parts automatically?

SLDIAG

Call Home

AutoSupport

2. You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.

How do you verify your configuration?

Use the storage show disk -p command.

Use the storage disk option show command.

Use the disk show -fields initiator command.

Use the sysconfig command.

3. Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.

In this scenario, which two statements are correct? (Choose two.)

Configure an SNMP community string on the cluster.

Configure DNS on the cluster.

Configure a trap host on the cluster.

Configure a firewall policy and allow SNM

4. A customer using ONTAP or later needs a node-specific license key.

What will the license key be matched against?

controller chassis serial number

controller NVRAM

controller system ID

controller serial number

5. You have just configured the customer's first SVM with a LIF IP 10.0.0.10/24. The customer's DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works.

In this scenario what is the problem?

You need to have the DNS server on the same subnet as the LIF IP address.

You need to add a static gateway to the LIFs routing group.

You need to have the customer check the cable.

You need to add an IPspace and domain broadcast to the port.

6. Exhibit:

While you are introducing the customer to the NetApp Support website, they ask you to ensure that the new ONTAP storage array is covered by support before you complete the knowledge transfer procedure.

Referring to the exhibit, which two widgets would you select to accomplish this task? (Choose two.)

Active IQ

Product Support

Systems

Contracts and Warranties

7. Upon completion of an installation, you have begun failover/giveback testing. You notice that when node-02 has been taken over by node-01, node-02 will not respond to ping requests.

Which statement describes what is happening?

The controller is down and has been taken over by the partner, this is normal behavior during a failover.

The controller that is up, node-01, does not have partner statements in the /etc/rc file.

The controller that is down, node-02, does not have partner statements in the /etc/rc file.

There are no ports in the LIFs' broadcast domain that are linked.

8. What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)

Flash Pool

FlexClone volumes

FlashCache

thin provisioning

9. A new system fails to boot or has error messages indicating a problem with the system board memory.

What is the preferred method for diagnosing hardware problems in this scenario?

Verify the console output in system shell.

Run Config Advisor.

Run the appropriate SLDIAG test.

Run the node scope sysconfig Ca command.

10. What is the maximum number of cluster switches that is supported in the cluster network?

Page 2 of 8

11. A customer wants to configure port 0e/e0e on a FAS8060 system to Ethernet. The port is currently set to fc and is offline.

Which step(s) are needed to complete this operation?

Use the cluster1: : >set -privilege advanced command, and then use the cluster1: :> system node hardware unified-connect modify -node node1 -adapter 0e -mode can command.

Use the cluster1: : >set -privilege advanced command, and then use the cluster1: :> system node hardware unified-connect modify -node node1 -adapter 0e -mode cna command. Reboot the node and install the correct SFPs for the port's new personality.

Use the cluster1: : > system node hardware unified-connect modify -node node1 -adapter 0e -mode cna command.

Use the cluster1: :> network interface modify -node node1-adapter 0e -mode cna command, and then reboot the node.

12. A customer has a front end network with mixed speeds (10Gbps and 1Gbps). The customer wants you to use the 1Gbps link for redundancy.

In this scenario, what would you do to meet this requirement?

Create a dynamic multimode ifgrp.

Create a single-mode ifgrp.

Create a static multimode ifgrp.

Use broadcast-domains.

13. During handover, a customer asks you how to obtain support from NetApp after installation.

What are two responses in this scenario? (Choose two.)

Visit.

Visit mysupport.netapp.com

Send an AutoSupport message from the system.

Contact Global Support by telephone.

14. You are asked to Install an AFF A700 with two DS224C shelves fully populated. When you arrive, the customer asks you to install an additional shelf.

Which shelf would you add to this cluster?

a DS224C shelf fully populated with SAS drives

a DS224C shelf fully populated with SATA drives

a DS2246 shelf fully populated with SSD drives

a DS4486 shelf fully populated with SATA drives

15. What is the default shelf ID for disk shelves with IOM12 modules?

16. You are installing a new cluster with a pair of NetApp CN1610 switches.

Which three statements describe how the ports are configured according to NetApp best practices? (Choose three.)

Ports 13-16 are designated as cluster host ports.

All ports have standard frames enabled.

Ports 13-16 are designated as Inter-Switch Links (ISLs),

Ports 1 12 are designated as cluster host ports.

All ports have jumbo frames enabled.

17. You complete a hardware installation on a CN1610 switch and establish a serial connection to the RJ45 port.

In this scenario, the established serial connection allows the installer to complete which two tasks for the switches initial configuration? (Choose two.)

to manually configure the static network information

to configure the switch with another CN1610 switch using Cross-Stack EtherChannel configuration for load balancing and performanc

to view network information that has been dynamically assigned to the management interface by the DHCP server on the network

to use the serial port connection as a diagnostic channel to the second CN1610 switch in the cluster interconnec

18. You are installing a 2-node clustered Data ONTAP system that has been shipped to the site in multiple boxes.

How do you find the disk shelves that contain the root volumes for each node?

The box for the shelf containing the root volume is yellow.

The box for the shelf containing the root volume is red.

The root volume is on the nodes, not the disk shelves.

The disk shelf’s sticker contains the controller’s serial number.

19. You are asked to installed a new cluster with six FAS8060 nodes. While running Config Advisor, you determine that there is a newer firmware version for 16 HDDs.

How should this situation be handled?

Prior to leaving the site, advise the customer that firmware is included with the version of ONTAP they selected.

Unless the customer advises otherwise, upgrade the firmware on the HDDs to correct the Config Advisor error.

Unless the customer advises otherwise, leave the firmware alone and document the version of ONTAP being used to explain the issue.

Prior to leaving the site, confirm the version of ONTAP that the customer wanted installed to correct the Config Advisor error.

20. You want to verify a clustered Data ONTAP installation at a customer site. In this scenario, which tool you use?

Config Advisor

Solution Builder

Cluster Config Builder

Synergy

Page 3 of 8

21. An administrator has physical ports e0e and e0f connected to 10GbE upstream switches. The e0c and e0d ports are connected to 1GbE upstream switches. All four ports are in the same broadcast domain.

The administrator wants to make sure that LIFs that need 10GbE cannot failover to 1GbE ports, but that LIFs that can use 1GbE or 10GbE can still failover to all four ports.

In this scenario, what should you do to accomplish this task?

Create two separate broadcast domains: one that contains e0e and e0f, and one that contains all four ports.

Create two separate failover groups: one that contains ports e0e and e0f, and one that contains ports e0c and e0d.

Create two separate broadcast domains: one that contains ports e0e and e0f, and one that contains e0c and e0d.

Create two separate failover groups: one that contains ports e0e, and e0f only and one that contains all four ports.

22. You are performing HA failover tests on a 2-node cluster with FAS8200 controllers. You want to observe the boot process for the storage node in takeover.

To which interface should you connect to accomplish this task?

Service Processor

SVM management

cluster management

node management

23. You install a new 2-node FAS8200 switchless cluster. You want to reach all necessary management LIFs and SPs for this cluster.

How many management IP addresses do you need in this scenario?

24. Which two optional add-on software products must be licensed? (Choose two.)

CIFS

SnapRestore

SyncMirror

OnCommand System Manager

25. You have a 2-node switchless cluster named clusterA. You are planning on adding two additional nodes to clusterA.

What must you consider before you add the addiHonal nodes to clusterA?

Convert clusterA to a switched cluster by migrating the data lIFs from direct connect to die cluster interconnect switch.

Convert clusterA to a single-node cluster.

Convert clusterA to a switch** cluster by migrating the cluster LIFs from direct connect to the cluster interconnect switch.

Use direct connect to add the additional nodes to cluster

26. You are setting up a new cluster. The customer notices that there are many management ports on the cluster. The customer wants to know the purpose of the cluster management LIF.

In this situation, what should you tell the customer?

The cluster management LIF provides a dedicated IP address for the entire cluster and can fall over to any port in the cluster that Is available in the broadcast domain.

The cluster management LIF provides a dedicated IP address for managing a particular node in the cluster and is used for system maintenance.

The cluster management LIF is used to carry Intracluster traffic between nodes In a cluster and must be created on a 10GbE network port.

The cluster management LIF provides multiple IP addresses for the entire cluster and can fall over to any cluster or intercluster ports.

27. You just installed a new AFF A220 2-node cluster without additional disk shelves. When you review the Config Advisor output, you notice that your SAS cabling appears to be single-path HA.

In this scenario, which statement is true?

The Config Advisor version you are using requires a plugin for AFF controllers.

AFF A220 controllers with internal disks support only single-path H

Cable controller 1 0a to controller 2 0a, and cable controller 1 0b to controller 2 0b.

Cable controller 1 0a to controller 2 0b, and cable controller 1 0b to controller 2 0a.

28. A customer ordered two new DS224C shelves. The Customer wants you to add these shelves to an existing stack which consists of two DS2246 shelves.

Which statement is true in this scenario?

You need to order additional cables to expand the existing stack.

Mixing DS224C and DS2246 shelves in the same node is not supported.

You cannot mix DS224C and DS2246 shelves in the same stack.

DS224C shelves are supported with only new HBAs.

29. A customer wants to expand their 10-node AFF A700s SAN cluster on Cisco Nexus 3132Q-V interconnect switches. The customer has six AFF A700s nodes available.

In this scenario, what should you do to expand the cluster?

Add two nodes to the existing cluster without exceeding the SAN cluster limit.

Add six nodes to the existing cluster.

Replace the switches with Cisco Nexus 5596T switches and then add the six nodes.

Add an expansion module to each switch and then add the six nodes.

30. You are performing a nondisruptive image upgrade of a CN1610 switch. You verify that there are no path failures on the switch.

What is the next step in this process?

Run the write memory command.

Run the reload command.

Backup the current running image using the copy active backup command.

Reboot the switch.

Page 4 of 8

31. After proper cabling the NetApp CN1610 cluster switches, you notice that joining the second node to a cluster fails because the node is not able to communicate with the other node.

What would be the reason for this malfunction?

CN1610 is unsupported in newer ONTAP versions.

The NTP server is not set.

The RCF file is not loaded properly

The cluster switches must be Cisco switches for two or more nodes in a cluster.

32. What are two ways to identify an AFF All SAN Array system? (Choose two.)

Use the san config show CLI command.

View the ONTAP System Manager system nodes.

Use the cluster image show CLI command.

View the ONTAP System Manager cluster settings.

33. You are going to add a node to an existing cluster but first you must gather the appropriate Information for the new node's management LIF.

What two pieces of Information is required to accomplish this task? (Choose two.)

IP address

NTP server address

Service Processor Information

default gateway

34. What is the maximum node count in a cluster when using NetApp CN1610 switches?

35. You are adding nodes to a 2-node switchless cluster. Before you add the nodes, which statement is correct?

You must install and configure the interconnect switches

You must enable and configure a cluster H

You must install and configure the cluster peering.

You must gather the port, IP address, and NTP information for the new node management LI

36. After installing cluster switches, you want to verify that the switches are operating as they should.

What would allow you to accomplish this task?

Use Config Builder.

Use the cluster ping-cluster command in privilege advanced mode.

Use the network device-discovery command in privilege advanced mode.

Use OnCommand System Manager.

37. You want to add additional nodes to a cluster.

Which action will complete this task?

Run the node join command on the new nodes.

Run the cluster setup command on the new nodes.

Run the cluster join command on the existing cluster.

Run the cluster setup command on the existing cluster.

38. Regarding clustered Data ONTAP 9, what happens to the roles of the on board ports, HBAs, and NICs?

These roles are assignet when LIFs are created.

These roles are assigned based on the controller type.

These roles are predefined and must be changed before creating your LIFs.

The roles are divided into two categories: Data Management and Node Management.

39. You are planning to install a new ONTAP All SAN Array (ASA) into your existing data center.

In this scenario, which cluster configuration is allowed with ASA controllers?

Add the ASA controllers to an existing 4-node cluster with NAS licenses.

ASA controllers can only be added to clusters that have existing SAN licenses.

ASA controllers can only be installed as a standalone HA pair.

Add the ASA controllers to an existing 10-node cluster.

40. An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.

In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer’s requirement? (Choose two.)

Ensure that Active IQ Config Advisor is installed.

Ensure that the onsite engineers receive EMS alerts when hardware issues occur.

Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.

Educate the onsite engineer about how to manually log support calls.

Page 5 of 8

41. A customer wants to reduce the disk allocation requirement for the root aggregate and increase usable storage by partitioning the disks into one large part and one small part.

The small part is used for the root aggregate and the large part for the data aggregates.

In this situation, what is this feature called?

ONTAP

storage virtual machine

Advanced Drive Partitioning

RAID

42. You are given a standard license key for NFS. In which scenario would this standard licensed be used?

The licensed is locked to a node with a specific serial number

The license will be available for any node in the cluster.

The license will be available for use on an HA pair for use.

The license is locked to a cluster with a specific serial number.

43. During an installation of an AFF A400 cluster, you need to configure secure multitenancy.

What will enable you to accomplish this task?

failover groups

VLANs

broadcast domains

IPspaces

44. At a new Installation, you run Config Advisor and see the warnings shown In the exhibit.

What should you do to correct the warnings on the node?

Set the flow control on all the 10GbE ports to none, and delete the AutoSupport settings.

Set the flow control on all of the l0GbE or 40GbE cluster interconnect ports to None.

Delete all of the AutoSupport settings, and change the flow control to full.

Set the flow control on all the lGbE ports to match the 10GbE pods.

45. What are two requirements for a 6-node cluster? (Choose two.)

network connectivity from the cluster to the customer's infrastructure

dedicated switches for the cluster interconnect

SAN connectivity from the cluster to the customer's infrastructure

dedicated switches for the cluster management

46. You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.

Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?

1/21 to 1/24

0/13 to 0/16

1/31 and 1/32

0/1 and 0/2

47. What is the main function of ACP?

it allows cabling the shelf to two additional controllers.

It allows the controller to use Ethernet instead of SAS to fetch the storage data.

it allows the controller to nondisruptively reset the SAS expanders.

It enables the automatic shelf ID assignment.

48. A customer has several physical ports attached to the same VLAN.

How must the ports be grouped together?

using a broadcast-domain

using a failover-group

using a port set

using an ifgrp

49. You are adding two new nodes into an existing switchless 2-node cluster.

Which two statements are true in this scenario? (Choose two.)

You first need to Install the cluster interconnect switches to the existing cluster.

You must make sure that the existing nodes are healthy and that all cluster links are up.

The existing cluster must use clustered Data ONTAP 8.1 or later software.

You need to schedule downtime to add these two nodes.

50. After a system panic, the NetApp Support team advises you to run the sldiag command.

Which two actions must be performed before you use this command? (Choose two.)

At the LOADER prompt, type boot_maintenance.

At the storage system prompt, type halt.

At the LOADER prompt, type boot_diags.

At the storage system prompt, type boot_maintenance.

Page 6 of 8

51. You are planning to update your running switch environment. You need to determine if certain conditions exist before the FASTPATH software and reference configuration file (RCF) on a NetApp CN16xx cluster switch can be installed.

Which condition must exist in this scenario?

You must set the port configuration to default for all ports before running the portcfgdefault portnumber command.

The cluster must be a fully functioning cluster (no error log messages or other issues).

All ISL ports must be moved to a different switch.

You can only update your switch environment within offline windows.

52. You are adding new nodes to a 2-node switchless cluster.

According to NetApp, what must you do before adding the nodes?

You must configure cluster peering.

must install interconnect switches.

You must configure vserver peering.

You must enable a cluster HA

53. A customer wants you to add a new AFF A700 HA pair to an existing 4-node AFF8080 EX cluster. The existing cluster uses netApp CN1610 switches for the cluster connection and is using the recommended port count.

Which statements is true in the scenario?

You cannot mix different AFF models in the same duster.

There are not enough ports available on the duster switch.

You cannot have more than four nodes with AF

The AFF A7O0 is not supported with NelApp CN1610 switches.

54. A 2-node cluster using the NetApp CN1610 switch requires how many ISLs?

55. A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports.

However, LIFs that serve the block have not migrated. In this scenario, what is happening?

The failover group is configured incorrectly.

The fiber switch is configured incorrectly.

There is a faulty SF

The LIFs that serve the block protocol do not failover.

56. You have just finished installing and configuring an ONTAP cluster for a customer.

In this scenario, which product collects information and produces site documentation?

NetAppDocs

Inventory Collect Tool

SnapGathers

Active IQ OneCollect

57. Which tool checks a newly installed environment for configuration errors?

FilerView

BNA

Synergy

Config Advisor

58. You are adding two new nodes to an existing switchless 2-node cluster. In this scenario, which two statements are true? (Choose two.)

You must make sure that the existing nodes are healthy and that all cluster links are up

You need to schedule downtime to add these two nodes

The existing cluster must use clustered Data ONTAP 8.1 or later software

You first need to install the cluster interconnect switches to the existing cluster

59. After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.

In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?

clustering ring show

cluster ha show

cluster show

cluster image show

60. After completing an installation, the customer wants to know how they can manually open a new technical case with NetApp Global Support.

What are three ways to accomplish this task? (Choose three.)

Use the support site.

Use the NetApp Field Portal.

Use the mobile app.

Use a telephone.

Use AutoSupport.

Page 7 of 8

61. You are assigned to install two DS2246 shelves, three DS4243 shelves, and one DS4486 shelf.

How many rack units (U space) should you account for in this rack layout?

20U

10U

22U

62. You are asked to install a 6-node cluster of FAS8080 controllers. The installation has been completed and Config Advisor shows no warnings or errors. The customer can ping and access the controller.

Which statement is true in this scenario?

This installation has not been completed successfully until you have confirmed that SSH is enabled.

This installation has not been completed successfully until the customer and NetApp Support have received a minimum of three AutoSupport messages.

This installation has been completed successfully only if you have confirmed that the configuration is correct.

This installation has been completed successfully, because Config Advisor would identify the missing configuration.

63. What is the minimum number of disks required in a SAS shelf?

half of the shelf's capacity

one

two

there is no minimum

64. What are two reason why automatic giveback fails? (Choose two.)

SAN sessions are established.

Storage failover is disabled.

NFS sessions are established.

The disk shelf is too hot.

65. Which two functions does the management network provide? (Choose two.)

to provide access to the system console of any node in the cluster

to collect diag log files

to replicate the cluster configuration to all nodes

to transfer SVMs between the cluster nodes

66. You want to add two new nodes to an existing 4-node cluster.

In this situation, what must be considered regarding the cluster interconnect?

When a new node joins a cluster, IP addresses are generated automatically

When a new node joins a cluster, IP addresses are used from the data LI

When a new node joins a cluster, the customer must give you IP addresses from the customer's local IP range.

When a new node joins a cluster, you must use "class A" subnet settings.

67. Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)

Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the daily tasks and provide input and output examples.

If you have a specific issue, you can visit the Knowledge Base Web site (https://kb.netapp,com).

The answers to any of your questions can be found on the NetApp SmartSolve site (http://smartsolve.netapp.com).

You should open a case with NetApp Support for all future questions with low priority and include the keyword "Training" in the title.

68. Config Advisor reports that you have a single point of failure on a stack of shelves.

After investigation, you have assigned the following ports to each stack:

stack 1 - ports 0a and 0b

stack 2 - ports 3a and 4b

stack 3 - ports 4a and 3b

In this scenario, which two changes would you make to the cabling to solve the problem? (Choose two.)

Cable stack 3 to ports 4a and 0b.

Cable stack 2 to ports 4a and 4b.

Cable stack 1 to ports 0a and 3b.

Cable stack 3 to ports 3a and 3b.

69. A customer must create VLAN 599 tagging on physical port e0g from cluster node filer1-01.

What is the name of the new VLAN interface?

e0g-vlan599

vlan599-e0g

vl599-e0g

e0g-599

70. Select the exhibit tab.

The exhibit illustrates the network cabling of a 4 node HA duster that includes four separate networks.

Which two definitions are correct in this scenario? (Choose two.)

Each node must be connected to five distinct networks.

A cluster can be created without data network connections, but It must Include a cluster interconnect connection.

Each node may be connected to the management and cluster networks only.

A cluster cannot be created without data network connections, but it must Include a cluster interconnect connection.

Page 8 of 8

71. After the Installation of a new 2-node cluster, you want to make sure that AutoSupport is working as expected from the cluster.

In this scenario, what are two ways to trigger a new AutoSupport? (Choose two.)

Use the ping command on the mailhost.

Use the OnCommand Unified Manager GU

Use the OnCommand System Manager GU

Use the system node autosupport invoke -type test command.

72. While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.

In this scenario, which two statements are true? (Choose two.)

You must move the boot device from the impaired node to the replacement node.

The boot device must remain intact and must not be removed from the impaired node.

You can change any drives or disk shelves as part of this replacement procedure.

A controller model of the same type must be used to replace the impaired node.

73. You have completed the installation and verification of the cluster for a customer.

What is required to complete the event?

Present the customer with the posters included in the boxes.

Call your manager to let them know that you are finished.

Have the customer call NetApp Support to let them know that the installation is complete.

Have the contact sign a document saying that the installation is complete.

74. A customer has a six-node cluster running NFS and FCP. The customer wants to add nodes to the cluster.

How many nodes would be added in this scenario?

75. Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.

In this scenario, which two commands would you use to perform this test? (Choose two.)

system node run -node NetApp-Cluster-02 -command cf takeover

storage failover giveback -of-node NetApp-Cluster-02

system node run -node NetApp-Cluster-02 -command cf giveback

storage failover takeover -of-node NetApp-Cluster-02

76. Which tool would help you to verify an installation of an ONTAP cluster?

NetAppDocs

OnCommand Insight

Config Advisor

OnCommand Unified Manager

77. You are installing a pair of Cisco Nexus 3132Q-V cluster switches and receive several syntax errors when the reference configuration file (RCF) is applied.

In this scenario, what are two reasons for these errors? (Choose two.)

An RCF file for a different version has been loaded.

The switch was not in maintenance mode.

The RCF was already applied.

Cables were not removed before applying the RC

78. Which two SVMs are automatically created during the cluster setup? (Choose two.)

admin SVM

system SVM

node SVM

data SVM