Gain Your NCDA Certification With Free NS0-162 Exam Questions

test2021-10-18T08:46:36+00:00

By test NCDA, NS0-162, NS0-162 dumps, NS0-162 exam dumps, NS0-162 exam questions, NS0-162 free dumps, NS0-162 free questions, NS0-162 study guide 0 Comments

The NetApp Certified Data Administrator certification is designed for IT professionals with experience on NetApp’s proprietary operating system, ONTAP. Earning the NCDA certification requires passing one exam — the NetApp Certified Data Administrator, ONTAP (NS0-162) exam.

Before writing the NCDA Certification NS0-162 exam, you may have doubts about the test mode, the types of questions asked, the difficulty of the questions, and the time required. Complete the question. These Free NS0-162 Exam Questions and demo exams from FreeTestShare will help you eliminate these questions and prepare you for the exam.

Page 1 of 9

1. You are asked to delete an SVM that was used for CIFS.

Which two steps must be completed prior to completing this task? (Choose two.)

Delete all LIFs from all SVMs.

Stop the SV

Delete all data volumes in the SV

Delete the CIFS license.

2. You want to enable jumbo frames on a NetApp storage system.

Which network object would you modify to accomplish this task?

broadcast domain

port

LIF

VLAN

3. You have a 4-node cluster with 2x AFF A700 controllers and 2x FAS8200 controllers. A volume set to default settings is moved from a FAS8200 to an AFF A700 using the volume move command.

In this scenario, which volume parameter change will allow for data compaction?

space-allocation

security-style

space-guarantee

fractional-reserve

4. You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames.

In this scenario, which three configurations would accomplish this task? (Choose three.)

Enable jumbo frames with an MTU of 9000 for your ESXi hosts.

Enable jumbo frames with an MTU of 9216 for your switches.

Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.

Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.

Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.

5. What are three advantages of configuring network subnets? (Choose three.)

The DNS zone is automatically set on the NAS LI

The IP address is automatically set on the NAS LI

The flow control is automatically set on the port.

The default gateway is automatically added to the SV

The subnet mask is automatically set on the NAS LI

6. In an aggregate with only thick-provisioned volumes, you need to split a FlexClone volume from its parent volume. There are other volumes in the aggregate.

In this scenario, how much space must be available within the containing aggregate?

You need enough space for half the size of the parent volume.

You need to double the space in the existing aggregate.

You need enough space for twice the size of the parent volume.

The split FlexClone volume must be created in a new aggregate.

7. Exhibit:

Your ONTAP 9.8 cluster administrator modified a LIF to use a new service policy. Referring to the exhibit, which type of peer connection is used by lif1?

SVM

BGP

OSPF

Cluster

8. A 2-node switches cluster experiences a node failure. In this situation, which LIF automatically migrates to a different port?

SAN data LIF

intercluster LIF

NAS data LIF

node management LIF

9. How would you protect a NAS SVM root volume?

Create a SnapMirror copy of the root volume to a peer cluster.

Create load-sharing mirrors.

Create a backup the SVM configuration.

Create a backup of the SVM root volume.

10. Your company has two separate, untrusted Active Directory (AD) domains You need to serve CIFS shares to users in both AD domains and will later merge to one AD domain. The end goal is to serve all CIFS shares out of a single SVM.

In this scenario, which two actions will meet both requirements? (Choose two.)

Execute the volume modify command.

Create one SV

Execute the volume rehost command.

Create two SVMs.

Page 2 of 9

11. You are asked to create a new SVM to serve SMB data using Active Directory authentication.

Which two requirements must be satisfied prior to serving data? (Choose two.)

DNS must be enabled and configured correctly.

The CIFS license must be installed on the storage system.

An intercluster LIF must be created for serving SMB data.

An administrative user must be created for the SMB SV

12. You are configuring an ONTAP cluster to use NVMe/FC.

In this scenario, which two statements are true? (Choose two.)

Create NVMe LIFs on FC target ports.

Create an SVM with both NVMe and FC protocols enabled.

Create an SVM with NVMe enabled.

Create and start the FC service.

13. Click the Exhibit button.

Assuming that the export policy on the storage allows access, you want to enable client access to the finance volume in the departments SVM in the /tmp/fin directory.

Referring to the exhibit, which UNIX command must be executed to accomplish this task?

mount Ct nfs Co nfsvers=3 cluster01:/finance /tmp/fin

mount Ct nfs Co nfsvers=3 cluster01:/fin /tmp/fin

mount Ct nfs Co nfsvers=3 cluster01:/dept/fin /tmp/fin

mount Ct nfs Co nfsvers=3 cluster01:/departments/finance /tmp/fin

14. Node A has taken over Node B. You solved the issue that caused the takeover and are now ready to resume normal operation.

After initiating the storage failover giveback command, how are the aggregates given back? (Choose the best answer.)

CFO aggregates are automatically given back, SFO aggregates must be manually given back.

CFO aggregates and SFO aggregates are automatically given back.

The root aggregate is automatically given back, CFO and SFO aggregates must be manually given back.

SFO aggregates are automatically given back, CFO aggregates must be manually given back.

15. An administrator wants to restore a file using the Previous Versions tab on a Windows client.

Which command enables the Previous Versions feature?

volume modify -group

volume modify -user

volume modify -policy

volume modify -snapdir-access

16. After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator.

In this scenario, which two tasks must you complete? (Choose two.)

Create the vsadmin user account in the new SV

Create a LIF for SVM management.

Configure role-based access control (RBAC) for the vsadmin user account.

Set a password for (the vsadmin user account.

17. Exhibit.

Miss-----------------

The availability of the remote cluster in the peering relationship shows "Partial."

Referring to the exhibit, what is the reason for this status message?

The remote cluster does not have its cluster license applied properly.

The local cluster is unable to authenticate successfully to the remote cluster.

Some nodes In the local cluster are not able to contact some or all nodes in the remote cluster.

The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.

18. You have a 4-node cluster with 2x AFF A300 and 2x FAS8200 controllers. One of the AFF A300 controllers has a 50 TB FlexVol volume that needs an immediate read-write copy for standalone testing on one of the FAS8200 controllers.

Which two commands combined accomplish this task? (Choose two.)

volume clone create

volume move

volume rehost

volume clone split

19. Which failover policy is set by default on an iSCSI LIF?

local-only

broadcast-domain-wide

disabled

sfo-partner-only

20. You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are In the NAS volumes of the cluster and how old these files are.

Which two tools fulfill this requirement? (Choose two.)

Active IQ Config Advisor

Active IQ Unified Manager

ONTAP System Manager

ONTAP CLI

Page 3 of 9

21. Your company wants their newly Installed ONTAP system to automatically send telemetry data to NetApp to provide early notification of any security risks, bug fixes, and ONTAP updates. Furthermore, In case of hardware failures, a support case should be opened automatically at NetApp.

Which two NetApp components satisfy the requirements? (Choose two.)

Cloud Insights

Active IQ

ONTAP AutoSupport

Active IQ Unified Manager

22. A storage administrator moves a LUN from one volume to another.

In this scenario, what is left behind in the volume?

LUN geometry settings

all of the deduplicated blocks from the base LUN

Snapshot copies of the volume

clones of the LUN

23. You are provisioning a LUN for a new host.

In this scenario, which three objects must exist? (Choose three.)

export policy

igroup

LUN

interface group

volume

24. Which two features are supported on NetApp ONTAP? (Choose two.)

SnapMirror

FlexCache

Fibre Channel

Storage Pool

25. Exhibit:

Referring to the exhibit, what are two reasons why no initiators are displayed in the initiators' igroup screen? (Choose two.)

The server has not been powered up.

SLM has not been enabled.

Zoning on the switches has been done incorrectly.

ALUA has not been enabled on the NetApp controllers.

26. A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed. In this scenario, how many additional nodes are supported?

27. An administrator is configuring an aggregate to use FabricPool to take advantage of auto tiering.

In this scenario, what are three requirements to accomplish this task? (Choose three.)

volume with space-guarantee none

FabricPool license

intercluster LIFs

volume with space-guarantee volume

AFF array

28. A storage administrator has a Linux Oracle database that is using a SAN configuration with multiple dualported FC HBA connections for path resiliency and performance. The HBA ports are configured to separate FC switches.

Before configuring the LUNs from the storage, what information must be obtained from the host? (Choose three.)

the speed of the FC ports of the host HBAs

the amount of cache memory installed

the WWPNs of all of the FC ports installed

the status of ALUA

the status of multipathing driver

29. Which three name services does ONTAP support? (Choose three.)

HTTP

local files

LDAP

NIS

SNMP

30. An administrator has an SVM named vs1 that is being used for UNIX workloads. Name mappings have been configured with both local name mapping files and with LDAP.

NIS will not be used in the environment. The administrator needs to ensure that LDAP takes precedence for access over file-based name mappings.

In this scenario, how would you accomplish this task?

Do not change anything, this is the default behavior.

Use the vserver services name-service ns-switch command to set the order of preference.

Modify the /etc/nsswitch.conf file to set the order of preference on the UNIX hosts connecting to the SV

Use System Manager to modify the properties of the vserver to set the order of preference.

Page 4 of 9

31. Exhibit:

Referring to the exhibit, what is the throughput limit for the shares0 volume?

250 IOPS

25 MB/s

50 MB/s

1000 IOPS

32. Where would you look to find the minimum and the maximum number of array LUNS supported by FlexArray?

One Collect

Hardware Universe

Interoperability Matrix Tool (IMT)

Config Advisor

33. You are setting up replication between two clusters.

In this scenario, which two components are required to set up the cluster peering? (Choose two.)

DNS service on each cluster.

An intercluster LIF on only the epsilon node.

ICMP service between clusters.

An intercluster LIF on every node.

34. 1.You currently have an 8-node cluster and want to perform a rolling upgrade to a newer version of ONTAP to solve security issues reported in the Active IQ Web site.

In this scenario, which two steps should you validate before you perform the upgrade? (Choose two.)

Run Active IQ Config Advisor.

Validate Nodes with Hardware Universe.

Validate Nodes with Active IQ Unified Manager.

Run Upgrade Advisor Report.

35. An administrator created an SVM for a VMware vSphere 6.5 cluster. For the SVM, the NFS protocol was enabled. Data LIFs were configured with jumbo frames.

The nfs01 volume was created and mounted as junction path / nfs01. A VMware export policy that allowed all the hosts of the cluster was applied to the SVM. However, the hosts are unable to mount the volume.

In this scenario, what caused the problem?

NFS v3 is not compatible with ESXi hosts.

The volume is not thin provisioned.

The maximum transmission unit (MTU) was not set properly on the ESXi hosts.

The default export policy needs to allow reads from the ESXi hosts.

36. Which NetApp tool indicates whether you have applied data protection policies to all volumes?

Virtual Storage Console

OnCommand Unified Manager

Config Advisor

OnCommand Service Level Manager

37. After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports.

In this scenario, which two methods would accomplish this task? (Choose two.)

Use ONTAP System Manager.

Use the command line interface.

Use Active IQ Config Advisor.

Use Active IQ Unified Manager.

38. You need to Increase the number of files that can be created In a volume.

Which two methods enable you to achieve this goal? (Choose two.)

Increase the number of files permitted on the volume.

Set the space guarantee to 'volume".

Set the fractional reserve to "0".

Increase the size of the volume.

39. Which storage efficiency policy is automatically defined when you run volume move from a non-AFF system to an AFF system?

inline-only

promote

default

auto

40. In which version of ONTAP did the NVMe protocol become available for SAN environments?

9.4

9.5

9.3

9.2

Page 5 of 9

41. An administrator has a FlexGroup volume configured on a 4-node FAS8200 cluster. New nodes have been added to the cluster, and the administrator wants to improve performance on the FlexGroup volume using the new nodes.

Additionally, the FlexGroup volume size needs to increase to accommodate new workloads.

Which command would satisfy the requirements in the scenario?

aggregate add-disks

volume expand

volume modify

volume mount

42. You change a volume's space guarantee from volume to none.

In this scenario, which statement is correct?

Free space from the volume shows up as free space in the aggregate.

All existing snapshots are automatically deleted.

Snap reserve is set to zero (0).

Fractional reserve is set to zero (0).

43. An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.

Which NetApp solution would you propose to fulfill these requirements?

SyncMlrror

SnapMirror Business Continuity (SM-BC)

SVM Disaster Recovery (SVM DR)

SnapMirror Synchronous (SMS)

44. Which three protocols are supported by NetApp ONTAP Select? (Choose three.)

NFS

SCSI

NVMe

FCP

CIFS

45. Which two SVM types does a cluster contain after cluster creation? (Choose two.)

dp-destination

peer

data

admin

46. You want to create a FlexGroup volume that contains four aggregates with eight constituents each.

In this scenario, what is the value of the aggregate list multiplier?

47. When you create a new SSD storage pool for use with Flash Pools, how many allocation units are assigned to each node in the HA pair by default?

48. A customer has four or more nodes in a cluster. More than four target ports are being used by the SVMs in any node. The customer wants to limit the number of paths that can be used to access LUNs on the nodes, so that the paths do not exceed the recommended maximum of eight.

In this scenario, which three actions will accomplish this task? (Choose three.)

Use Selective LUN Mapping

Use port sets for iSCS

Use FC switch zoning.

Use ALUA protocol.

Use multipathing software.

49. Exhibit.

You create a storage virtual machine (SVM) called SVM500 that is provisioned for iSCSI. After creating a LUN in the SVM and mapping it to an igroup, the attached VMware hosts are unable to mount the LUN.

Referring to the exhibit, what is the issue?

The igroup contains the wrong protocol.

The igroup contains multiple Initiators.

The initiator is a member of igroups of different OS types.

The igroup does not contain the appropriate initiators.

50. You must create a CIFS share for a replicated destination volume for read-only access to the files.

In this scenario, which task must be completed before you create the share?

Mount the volume.

Break the replication.

Change permissions.

Set up the preferred domain controller.

Page 6 of 9

51. You have a 2-node NetApp cluster with CIFS volumes and SAN LUNs on both nodes. The FC hosts have MPIO correctly configured and see LUN paths through both NetApp nodes.

During a node failover, which two statements are true? (Choose two.)

FC hosts will experience an outage

FC hosts will not experience an outage.

Some CIFS users may experience a brief outage.

CIFS users will not experience any outage.

52. An administrator created, a NAS storage virtual machine for a vSphere environment. The administrator verified that all interfaces can communicate successfully. However, when the administrator attempts to mount the export, a connection refuse message is received.

Based on this scenario, what would you troubleshoot?

the igroup

the CIFS eport policy

the NFS export policy

the FC zoning policy

53. You have a FAS8200 serving a dataset with a high volume of random reads. The dataset is highly optimized by deduplication and compression.

In this scenario, which compression setting provides both high performance and storage efficiency? (Choose the best answer.)

compression disabled

aggregate compression

secondary compression

adaptive compression

54. Exhibit:

You are configuring your tape backup software to authenticate to your single-node cluster by using NDMP.

Referring to the exhibit, which LIF do you use to connect? (Choose the best answer.)

cluster_mgmt

cluster1-01_ic1

cluster-01_mgmt1

data_lif1

55. Which two performance threshold policies in OnCommand Unified manager are configurable? (Choose two.)

user-defined

volume

system-defined

dynamic

56. Which two objects are supported in a FlexVol volume? (Choose two.)

aggregate

qtree

RAID group

LUN

57. Which two types of HA policies are applied to which types of aggregates? (Choose two.)

storage failover (SFO) policy to data aggregates only

controller failover (CFO) policy to all the aggregates

storage failover (SFO) policy to root aggregates only

controller failover (CFO) policy to root aggregates

58. A storage administrator wants to use Windows directory services for an SVM serving SMB shares. Users will be authenticated by domain controllers.

Which two steps are required to accomplish this task? (Choose two.)

Create an SVM with the NFS protocol enabled.

Create an SVM with the CIFS protocol enabled.

Join an SVM to a Windows workgroup.

Join an SVM to a Windows Active Directory service.

59. Your company wants to Increase access security In both their NFS and ISCSI environments. Currently ISCSI Is not authenticated and NFS relies only on export policies for security.

Which two enhancements do you use to satisfy this new criteria? (Choose two.)

Enable Kerberos for NFS exports.

Enable Kerberos for iSCSI LUNaccess.

Enable Challenge-Handshake Authentication Protocol (CHAP) for NFS exports.

Enable Challenge-Handshake Authentication Protocol (CHAP) for ISCSI LUN access.

60. A customer installed an ONTAP cluster. The customer wants to provide data access to host computers and end users.

Which three tasks are required? (Choose three.)

Create a Quality of Service (QoS) policy.

Create an SV

Create a LI

Create an IPspace.

Create a volume.

Page 7 of 9

61. Which two statements are true for mailbox disks per node in an HA pair? (Choose two.)

Six disks are required if the root volume is on a mirrored aggregate.

Two disks are required if the root volume is on a disk shelf.

Four disks are required if the root volume is on a mirrored aggregate.

Eight disks are required if the root volume is on partitioned disks.

One array LUN is required if the root volume is on a storage array.

62. You want to delete a WORM file from a SnapLock Enterprise volume.

Based on this scenario, which two steps must you perform to accomplish this task? (Choose two.)

Unmount the SnapLock volume from the NAS namespace.

Move the file to a non-SnapLock volume.

If a SnapLock audit does not exist, create one.

Enable the privileged delete feature.

63. Exhibit:

https://www.nwexam.com/files/nwexam/download/NS0-160-Demo_1.png

Referring to the output shown in the exhibit, which aggregate capacity is available for a volume?

3.4 TB

3.6 TB

8TB

4TB

64. Exhibit:

The size of the aggr1 RAID group shown in the exhibit is 16.

What is the RAID type?

RAID-TEC

RAID-DP

RAID4

RAID0

65. On an All Flash FAS, where is the root parity information located on a node using Advanced Disk Partitioning?

distributed among SSD partitions

on a single SSD partition

on two SSD drives, regardless of RAID type

on a single SSD drive, regardless of RAID type

66. You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration.

In this scenario, which two actions would accomplish this task? (Choose two.)

Configure an authentication tunnel through an admin SV

Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SV

Use the vserver active-directory create command to create a computer account on the domain for a CIFS SV

Configure an authentication tunnel through an existing CIFS SV

67. You attempt to create an SVM for CIFS access only.

In this scenario, which three actions must be performed to Join the existing Active Directory? (Choose three.)

Create DNS entries.

Create a data LI

Create export policies.

Create NTP entries.

Create a cluster LI

68. You configure a new LUN on a NetApp cluster, and you can successfully access it from the host. An application using the new LUN is having storage performance problems, and ONTAP is reporting misalignment on the LUN.

In this scenario, what is causing the performance and misalignment problems?

The LUN was created with the incorrect OS type.

The host does not support ALU

The igroup is configured without Selective LUN Mapping (SLM).

The host is using a non-optimized SAN path.

69. You are creating a CIFS-based SVM, but the SVM cannot join the domain.

In this scenario, which two actions would be helpful in troubleshooting the problem? (Choose two.)

Verify that each node has a data LI

Verify that the cluster admin account is used to join the Active Directory.

Verify that the clocks are synchronized between the SVM and the domain controller.

Verify that the data LIF can access the Active Directory domain controller.

70. You must create separate SVMs that are based on teams. You also need to create separate SVMs that are based on the block-level and file-level protocols.

Your DevOps team requests NFS and CIFS protocols, your AI team requests NFS and NVMe protocols, and your marketing team requests SMB and iSCSI protocols.

In this scenario, what is the minimum number of SVMs that you must create to satisfy these requirements?

Page 8 of 9

71. Click the Exhibit button.

The exhibit displays the values for the default adaptive QoS policy. An administrator assigns the Value policy to a 1 TB volume. Over time, the volume expands to 3 TB.

What is the peak IOPS for the volume, both before and after the expansion? (Choose the best answer.)

512 IOPS and 512 IOPS

512 IOPS and 1536 IOPS

512 IOPS and 12288 IOPS

75 IOPS and 512 IOPS

72. You are using NetApp Volume Encryption (NVE) on an AFF system.

In this scenario, which two key-management solutions are supported for NVE? (Choose two.)

an SSH key manager

an XTS-AES-256 key manager

the onboard key management service

a KMIP server

73. You want to use FabricPool technology to tier SnapVault destination volumes to the capacity tier. In this scenario, which action would you perform to accomplish this task?

Create the destination volume on the FabricPool-enabled aggregate and assign the backup tiering policy to the destination volume.

Create both the source and destination volumes on a standard aggregate and assign the backup tiering policy to the destination volume.

Create both the source and destination volumes on the FabricPool-enabled aggregate and assign the backup tiering policy to the source volume.

Create the source volume on the FabricPool-enabled aggregate and assign the backup tiering policy to the source volume.

74. You are running out of space on an aggregate and decide to move a FlexVol volume to a different aggregate. You do not want to move the Snapshot copies with the volume.

Which two actions satisfy your requirement? (Choose two.)

Use the storage aggregate relocation command on the node.

Create a FlexClone volume.

Use the volume move command on the FlexCIone volume.

Use the volume rehost command on the FlexClone volume.

75. You are configuring an ONTAP solution for FC host connectivity.

In this scenario, how should the cluster be configured? (Choose two.)

The SVM must be configured for Ethernet LIFs.

FC ports must be configured as initiators.

FCP must be licensed on the cluster.

FC ports must be configured as targets.

76. When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)

The latest available Images will appear In the ONTAP System Manager interface.

The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.

The update history is available within the ONTAP System Manager interface.

The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.

77. A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8.

In this scenario, which two statements are true? (Choose two.)

Use XCP to copy data from a FlexVol to a FlexGroup.

Use SnapMirror to replicate data from FlexVol to FlexGroup.

You can convert the FlexVol volume to a FlexGroup volume.

A FlexVol to FlexGroup conversion is not supported.

78. You are using an AFF A700. In this scenario, which two default storage efficiency techniques will help save space? (Choose two.)

postprocess compaction

inline deduplication

postprocess deduplication

inline compression

79. When a storage QoS policy is configured, which two metrics are configured with a maximum limit? (Choose two.)

concurrent connections

IOPS

MBps

latency

80. SVM root volume protection should be configured when which two protocols are in use? (Choose two.)

NFS

CIFS

FCP

iSCSI

Page 9 of 9

81. Which two link layer discovery protocols does NetApp ONTAP support? (Choose two.)

Link Layer Topology Discovery Protocol

Cisco Discovery Protocol

Link Layer Discovery Protocol

Foundry Discovery Protocol

82. Exhibit:

You need to create a 200 GB volume that requires 700 IOPS.

Referring to the exhibit, in which aggregate should you create the volume?

aggr1_01

aggr2_02

aggr1_02

aggr2_01

83. Two 100 GB space-reserved LUNs and one 100 GB non-space-reserved LUN were created in System Manager in a 1 TB volume.

In this scenario, how much space has been allocated for writes to the three LUNs?

300 GB

1 TB

200 GB

100 GB

84. Exhibit:

A customer has zoned switches to a host, but the host cannot see the LUNs. Referring to the exhibit, what needs to be done to make the LUNs visible to the host? (Choose the best answer.)

Zoning should be changed to use the 20:06:d0:39:ea:05:03:a3 and 20:08:d0:39:ea:05:03:a3 WWPNs.

Ports on time-a700 nodes 1 and 2 should have the fc_nvme protocol removed.

Zoning should be changed to use the 50:0a:09:81:80:d2:c3:b8 and 50:0a:09:81:42:c2:b9 WWPNs.

The customer should remove the switches and directly connect the host to the controller ports.

85. Exhibit:

You use the commands shown in the exhibit to provision a FlexVol volume and LUN on an AFF A300. The volume shows 40% storage efficiency savings.

In which container is the free space returned?

qtree

aggregate

LUN

RAID group

86. You want to use SVM disaster recovery to replicate an SVM to your disaster recovery site.

You have the requirements shown below.

- The source and destination clusters are in different network subnets.

- The source SVM is running only NAS protocols.

- The CIFS server configuration should be replicated.

Which two configurations are correct in this scenario? (Choose two.)

The SnapMirror -identity-preserve parameter should be set to true.

The SnapMirror -discard-configs network policy parameter should be used.

The SnapMirror -discard-configs network policy parameter should not be used.

The SnapMirror -identity-preserve parameter should be set to false.

87. Exhibit:

An administrator realizes that daily snapshots are not being replicated to their destination. The administrator can see the daily snapshots created at the source.

The exhibit shows the policy in use. Weekly snapshots are being replicated without a problem, and the SnapMirror relationship is showing as "healthy".

In this scenario, what is causing the problem with the daily snapshot?

The vault policy applied to the source volume does not match the SnapMirror policy at the destination.

The SnapMirror label has not been applied to the daily snapshots.

The SVM peer is not working.

The daily snapshots at the source are busy due to the NDMP backup.

88. Exhibit:

You use DNS zone delegation to access an SVM that is set up for on-box DNS to nfs1.netapp.com. You can ping both lif1 and lif2 by IP address, but you can only ping lif1 by the delegated DNS name nfs1.netapp.com.

Referring to the exhibit, what must you do to allow on-box DNS access to lif2?

Configure lif2 in the external DN

Configure the name service to allow DN

Modify the DNS zone on lif2 to nfs1.netapp.com.

Modify the firewall policy on lif2 to management.