Download 2022 Latest DELL EMC DES-4122 Real Questions with Vertified Answers

test2022-01-26T09:38:35+00:00

By test DES-4122, DES-4122 free dumps 0 Comments

DES-4122 exam is a qualifying exam for the Specialist – Implementation Engineer,PowerEdge track. This exam focuses installing, administering, and troubleshooting Dell EMC PowerEdge server products. FreeTestShare has compiled a comprehensive collection of DES-4122 exam questions and answers to guide you through DES-4122 Questions Answers for your DES-4122 Exam preparation.

Try free online DES-4122 test practice questions.

Page 1 of 2

1. A technician working with a Dell EMC PowerEdge 1 take corrective action?

Check the System Event Log Check PSU LED Reseat the PSU

Check the System Event Log Check PSU LED Do a virtual reseat of the iDRAC

Check the LCC Log Check PSU LED Reseat the CPU

Check the LCC Log Check PSU LED Reseat the PSU

2. 1.A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned

How should the technician obtain access to the remaining 2 TB (approximately) of storage?

Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server

Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB

Upgrade to a newer version of the operating system

Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again

3. What is a characteristic of out-of-band management?

Dedicated device

Agent based

Less secure

Dependent upon OS

4. A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber.

What should they do to take corrective action upon checking the System Event log?

A)

Option A

Option B

Option C

Option D

5. What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?

Flexibility to choose interconnects

Fixed networking card

Consume a PCIe slot

Provide a hot-swap component

6. Starting from which Dell EMC PowerEdge server hardware generation is the Micro SD card in the IDSDM/vFlash module supported?

11G

12G

13G

14G

7. What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

Firmware: Upgrade to latest available version Configuration Apply always

Firmware Allow version upgrade only Configuration: Disabled

Firmware: Match firmware of replaced part Configuration Apply always

Firmware Disabled Configuration Apply only if firmware match

8. A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?

Both the iDRAC and the LCC can be rolled back

The LCC can be rolled back; the iDRAC cannot be rolled back

The iDRAC can be rolled back; the LCC cannot be rolled back

The iDRAC cannot be rolled back and the LCC cannot be rolled back

9. How can a technician know whether IDRAC9 System Lockdown mode is enabled?

Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots

10. You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives.

Which PERC model best supports this configuration?

S140

H740P

H740T

H330

Page 2 of 2

11. A Dell EMC PowerEdge R740 server requires a vFlash SD card urgently. Additional vFlash Cards and components from other servers are available.

What is the recommended solution?

Use a configuration option to convert an NVMe drive to a virtual vFlash

Use a configuration option to convert BOSS to a virtual vFlash

Reuse an existing vFlash SD card from a 14G server

Reuse an existing vFlash SD card from either a 13G or 14G server

12. CORRECT TEXT

A system engineer has a 14G Dell EMC Poweredge server with an amber light blinking. The engineer must pull a SupportAssist collection before calling Dell Support to evaluate what the potential problem. Use the simulator to collect and view the SupportAssist collection.

13. What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?

Single-level cell

Read Intensive

Quad-level cell

Write Intensive

14. What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?

Wi-Fi connection

NFC connection

Ethernet cable

Micro-AB USB

15. DRAG DROP

Refer to the exhibit.

Match each callout to the Dell EMC PowerEdge server model shown.