Delta - HPE Compute Solutions HPE0-S60 Exam Dumps

Delta – HPE Compute Solutions HPE0-S60 Exam Dumps

test2022-11-04T03:56:34+00:00

You can study the latest Delta – HPE Compute Solutions HPE0-S60 Exam Dumps which validates candidates’ ASE level technical skills regarding HPE compute solutions. Successful candidates will demonstrate knowledge of design principles and implementation expertise of HPE compute solutions within a customer environment. We guarantee your success if you study well by Delta – HPE Compute Solutions HPE0-S60 Exam Dumps.

Try free HPE0-S60 practice exam below.

Page 1 of 2

1. Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.

The customer reports that compute nodes cannot access the storage module.

What should you verify first when troubleshooting this problem?

If the D3940 module is imported in managed state that allows volume provisioning.

If there Is a logical interconnect created based on the 12Gb SAS switches.

If the D3940 storage module is property licensed through HPE OneView interface.

If there is at least one ISCSI network configured that will provide access to the module.

2. HOTSPOT

Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.

3. Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster

You are preparing a proposal with the following components:

- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules

- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy

- an appropriate number of the vSphere Standard licenses for each compute node

- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options.

Which statement about this proposal is true?

One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features

2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup

20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.

4. Which statement about a new HPE SimpliVity deployment is true?

New HPE SimpliVity deployments give customer flexible choice of hypervisor

All new HPE SimpliVity models are based on AMD CPUs

All new HPE SimpliVity models support deduplication and compression

New HPE SimpliVity deployments are licensed per node not per physical socket

5. Refer to the exhibit.

Which statement about this logical JBOD is true?

This logical JBOD can be connected to multiple systems to formulate a snared datastore.

After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created

After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done

This logical JBOD can be presented to the compute nodes in a different frame.

6. Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61

Which statement about this update process is true?

To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.

The customer can update directly to 6,1, but HPE OneView downtime will be longer.

Before updating to 6,1, customer should increase memory size on the HPE Composer.

The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

7. Refer to the exhibit.

Which statement about this logical interconnect group is true?

The master modules are located in the interconnect bays 2 and 5

For the given downlink speed, the maximum number of frames is reached

Both master modules are located in the same HPE Synergy frame

To use interconnect bay set 3, all compute nodes must be half-height

8. Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.

Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality

Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor

HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server

Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

9. An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays

Where should you start the troubleshooting process?

At the iLO interface to verify whether the ILO Advanced license is properly applied

At HPE OneView Interface to verify whether the server is In the maintenance mode

At the iLO interface to verify whether the SSO certificate is removed from an iL

At HPE OneView Interface to verify whether the iLO processor is disabled

10. Which statement about an HPE Oneview support dump is true?

Appliance support dump by default contains a logical enclosure support dump

Support dump is a binary file that can be opened only in a dedicated application

Support dump can be created if HPE Virtual Connect modules are installed in the frame

Preview support dump is available only when creating an appliance support dump

Page 2 of 2

11. DRAG DROP

Match HPE SimpliVity term with the definition.

12. DRAG DROP

Match each HPE Synergy logical component with the definition.

13. HOTSPOT

Your customer is implementing an HPE Synergy solution based on three frames.

Click each of the ports that can be used to connect satellite modules.

14. Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.

What must you be aware of regarding utilization sampling for the new modules?

Utilization sampling for HPE VC FC modules must be enabled manually using CL

For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled

For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied

Utilization sampling works the same way tor any type of HPE Synergy interconnect modules

15. DRAG DROP

You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.

Put the steps to achieve this goal into the coned order in the answer area on the right.

16. DRAG DROP

Match HPE Superdome Flex system with its specific feature.

17. You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.

Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

App Volume Set

Storage Container

Virtual Volume Set

virtual Volume

18. Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed

Which tool should you use to troubleshoot the problem?

HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered

vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded

HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.

ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.

19. As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2

Why would you recommend this change?

HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog

HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.

HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely

HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

20. HOTSPOT

After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.

Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.