Download Latest NetApp NS0-527 Practice Exam Questions

test2022-07-12T09:16:13+00:00

By test NCIE-DP Certification, NetApp NS0-527 Practice Exam Questions, NS0-527 free dumps 0 Comments

The best training tools for the NetApp NS0-527 exam can be found on the Internet. It may not only assist you in passing the NetApp NS0-527 test, but it can also help you develop your knowledge and abilities. Assist you in successfully advancing your career. FreeTestShare NetApp NS0-527 Practice Exam Questions fully describe what you will face on the real NS0-527 exam, allowing you to pass the NS0-527 exam quickly. We ensure that if you use the most accurate NetApp NS0-527 Practice Exam Questions, you will pass the exam on the first try!

Check the free demo to test yourself.

Page 1 of 4

1. A customer has developed a new application that uses Oracle with an AFF system to help track all of their shipping trucks around the world. The customer wants to ensure that application-consistent backups are offloaded to the cloud.

Inthis scenario, which two solutions enable the customer to satisfy these requirements? (Choose two.)

FabricPool

Flash Pool

SnapCenter

FlexClone

2. You have successfully deployed a primary and a secondary ONTAP cluster. You want to set up an intercluster SnapMirror relationship between your primary and secondary sites.

In this scenario, which two actions are required before accomplishing this task? (Choose two.)

NDMP must be enabled.

The SVMs must bepeered.

The primary and secondary clusters must be peered.

The Snapshot schedule must be configured.

3. You have a NAS volume that contains 250 GB of data with adaily change rate of 10%. You want to keep seven daily Snapshot copies.

In this scenario, what should the minimum copies of the volume be?

325 GB

550 GB

250 GB

425 GB

4. Click the Exhibit button.

Referring to the exhibit, which volume has the highest level of protection assigned to it?

project_a

mworthen_src1_lun

my_vol

new_work_vol

5. Click the Exhibit button.

You are configuring cluster peering from cluster2 to cluster1 on your ONTAP 9.7 clusters using ONTAP System Manager. You are given the details shown below to set up the cluster peer relationship. You want to determine why the peering has failed.

Cluster2 intercluster LIFIP: 192.168.0.143 Subnet: 255.255.255.0 Port: e0e passphrase:

netapp1234

Cluster1 intercluster LIF IP: 192.168.0.153 Subnet: 255.255.255.0 Port: e0e passphrase:

netapp1234

Referring to the exhibit, which statement is correct?

The Source Cluster IP is incorrect.

The Target Cluster Passphrase is incorrect.

The Target Cluster IP is incorrect.

The Source Cluster Passphrase is incorrect.

6. You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date. From My AutoSupport, which report would you use?

Transition Advisor

Visualization

Upgrade Advisor

Event Viewer

7. A volume has been filled completely by active data and Snapshot copies.

What must you do to make the volume writable again?

Delete files in the active file system.

Delete any SnapMirror relationships.

Delete enough Snapshot copies until space is available.

Modify the Snapshot reserve.

8. You are configuring a SnapMirror replication between a source volume with adaptive compression enabled and a destination volume with secondary compression enabled.

In this scenario; which statement is correct?

Blocks are uncompressed at the source and transferred to the destination.

Logical replication with storage efficiency is used.

Storage efficiency (compressed anddeduplicated blocks) is preserved during data transfer.

Data is recompressed using the source volume’s compression type.

9. You want to set up an important management solution that must comply with FIPS 140-2. The solution should support a multi-clusters environment and should provide centralized management of the encryption keys.

In this scenario, which solution accomplishes the task?

NetApp Storage Encryption (NSE)with external key management using the Key Management Interoperability Protocol (KMIP)

NetApp Volume Encryption (NVE) with onboard key manager using the Key Management Interoperability Protocol (KMIP)

NetApp Storage Encryption (NSE) with onboard keymanager using the Key Management Interoperability Protocol (KMIP)

NetApp Volume Encryption (NVE) with external key management server using the Key Management Interoperability Protocol (KMIP)

10. Exhibit:

Referring to the exhibit, You have a MetroCluster IP solution that uses Cisco Nexus 3232C back-end switches for a maximum ISL distance of 700 km.

What is the maximum round trip ISL latency that is supported in this scenario?

7 ms

10 ms

14 ms

20 ms

Page 2 of 4

11. Click the Exhibit button.

Using the NetApp Cloud TCO calculator, a customer wants to determine whether running Cloud Volumes ONTAP in Azure will be more costeffective than running native cloud services.

Referring to the exhibit, which action would satisfy the requirement?

Turn off High Availability.

Change the Azure VM Type to DS3_V2.

Turn on Tier to Azure Blob.

Change the Azure VM Type to DS14_V2.

12. You want to determine the amount of cold data that can be tiered from a FabricPool-enabled aggregate.

In thisscenario, which feature satisfies this requirement?

Inactive Data Reporting

Information Lifecycle Management

Object Store Profiler

Auto Balance

13. What are two NetApp data protection solutions? (Choose two.)

RecoverPoint

SnapMirror

TimeFinder

SnapVault

14. Which two configurations would be used to protect volumes in a production ONTAP system at twodifferent disaster recovery (DR) locations? (Choose two.)

SnapMirror in a fan-out topology

SVM DR in a cascade topology

SnapMirror in a cascade topology

SVM DR in a fan-out topology

15. What are three methods of configuring SnapMirror replication relationships? (Choose three.)

Use Active I

Use the ONTAP command line.

Use OnCommand Insight.

Use ONTAP System Manager.

Use Active IQ Unified Manager.

16. You configured a SnapMirror relationship with a default policy for the daily mirroring of a volume which contains financial data. Although the data is critical, it only changes on a monthly basis.

Using OnCommand System Manager, which two actions would change the frequency of the SnapMirror updates? (Choose two.)

Select or create a different schedule.

Edit the parameters of the default schedule.

Select or create a different policy.

Edit the parameters of the default policy.

17. A customer wants to assign a user to a build-in SnapCenter RBAC Role that will allow them to review and start existing SnapMirror processes only.

In this scenario, which Role will allow the customer to accomplish this task?

App Backupand Clone Admin

Infrastructure Admin

Backup and Clone Viewer

SnapCenter Admin

18. To ensure enough bandwidth for other applications, you want to restrict all replication bandwidth on your destination cluster.

How would you accomplish this task?

Using OnCommand System Manager on your source cluster, create a QoS policy on the source.

Using the ONTAP CLI, enable global throttling on the source cluster.

Using OnCommand System Manager on your destination cluster, create a QoS policy on the destination.

Using the ONTAP CLI, enable global throttling on the destination cluster.

19. Which two NetApp features would help you to recover from a file share that was encrypted by a ransomware event? (Choose two.)

SnapLock

SnapMirror

SnapRestore

Snapshot

20. You are asked to protect your user's HomeDir volume by keeping one weekly Snapshot copy for 52 weeks, one monthly Snapshot copy for six months, and one daily Snapshot copy for 90 days.

Which two statements describe how to accomplish this task? (Choose two.)

Create a single job schedule for weekly, monthly, and daily.

Create individual job schedules for weekly, monthly, and daily.

Create a policy to include the new job schedules.

Create a separate policy for weekly, monthly, and daily.

Page 3 of 4

21. A customer has a 2-node ONTAP Select HA cluster deployed on the same site. The ONTAP Deploy VM has been accidentally deleted. The 2-node ONTAP Select HA cluster is still serving data, but the storage failover capability has been disabled.

In this scenario, what would you do to reestablish the storage failover capability on your cluster?

Deploy two ONTAP Deploy VMs and a new 2-node ONTAP Select cluster and then migrate the data.

Deploy a secondary ONTAP Deploy VM and restore the 2-node cluster quorum.

Deploy two single-nodeONTAP Select clusters and migrate all exiting data.

Deploy a new 4-node ONTAP Select cluster and distribute data from the existing cluster.

22. A customer is running ONTAP 9.7 on a FAS2720 cluster that has 12 x 4 TB NL-SAS drives in the chassis with capacity running low. You decide to use Fabric Pool technology to solve this problem.

What does the customer need to do to accomplish this task?

Add an SSD aggregate.

Purchase a Data Protection Optimized (DPO) license.

Use the CLI and add a capacity pool.

Use the wizard and add a capacity pool.

23. After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.

In this scenario, what are two causes of this problem? (Choose two.)

There is a network disruption between sites.

ONTAP Deploy has been deleted.

The vSphere HA service has failed.

The HA interconnect cables have been removed.

24. You are asked to provision some new storage for VMware.

Which two tools are available to perform this task?(Choose two.)

OnCommand Insight

Virtual Storage Console

ONTAP System Manager

SnapCenter Plug-in for VMware vSphere

25. Which two NetApp products reduce the backup time and create a consistent backup for a primary Oracle target? (Choose two.)

SnapMirror for Open Systems

Open Systems SnapVault

SnapManager for Orade

SnapProtect

26. What are two ways to determine if yourSnapMirror relationships are up-to-date? (Choose two.)

Use Active IQ and navigate to Cluster -> Volumes -> Protection.

Use Active IQ Unified Manager and navigate to Protection -> Volume Relationships.

Use ONTAP System Manager and navigate to Protection -> Volume Relationships on the destination cluster.

Use ONTAP System Manager and navigate to Protection -> Volume Relationships on the source cluster.

27. You are deploying amission-critical business application for a healthcare customer that, according to government policies and regulations, requires zero data loss.

In this scenario, which NetApp solution enables you to set up data replication at a volume level to satisfy your business needs?

MetroCluster

SnapMirror-Synchronous

SnapShot Copies

SyncMirror

28. Which two cloud providers allow you to provision Cloud Volumes ONTAP as aSnapMirror destination? (Choose two.)

Azure

DigitalOcean

AWS

RackSpace

29. To assist with capacity planning, your supervisor wants to receive weekly capacity summaryreports using e- mail for all on-premises ONTAP clusters. You are asked to implement a solution that has no additional software licensing costs.

Which action accomplishes this task?

Configure Cloud Insights Premium Edition.

Create a capacity dashboard in Active IQ Digital Advisor.

Configure capacity and utilization reports in Active IQ Unified Manager.

Configure Cloud Insights Basic Edition.

30. You are running a NetApp AFF A220 cluster. Each node has one volume. You create Snapshot copies on both volumes every four hours and keep the copies for 30 days. You are running out of disk space and want to free up space.

In this scenario, what do you do?

Add a disk shelf with NL-SAS HDDs.

Activate aggregate-inline deduplication.

Add a capacity tier and set the tiering policy tosnapshot-only.

Activate aggregate-background deduplication.

Page 4 of 4

31. A customer’s infrastructure consists of multiple ONTAP clusters, both physical and virtual. The clusters replicate some data with each other. You want to generate a comprehensive report of all the replication that is present on the infrastructure.

In this scenario, which tool accomplishes this task?

OnCommand System Manager

Storage Replication Adapter

OnCommand Unified Manager

OnCommand Workflow Automation

32. You noticed that your SnapVault relationship is healthy but that the destination volume does not have any Snapshot copies.

In this scenario, what should be performed to solve the problem?

Set up volume destination free space.

Set up volume source free space.

Use the snapvault update command.

Configure a rule with the Snapshot label.

33. A customer is planning the cloud strategy for their Microsoft SQLdatabases and must be able to protect them from outages. They are planning on using multiple cloud providers for their solution with their current NetApp storage system.

In this scenario, which two products are required to satisfy their backup managementneeds? (Choose two.)

Cloud Volumes ONTAP

SnapCenter

CloudSync

FlashPool

34. During NDMP incremental backups, you want to reduce the time spent finding the changed data between two Snapshot copies.

In this scenario, which ONTAP feature will accomplish this task?

compaction

deduplication

SnapDiff

SnapLock

35. An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primarycluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.

In this scenario, what are two topologies that would accomplish this task? (Choose two.)

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror asynchronous from Cluster 2 to Cluster 3

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror Synchronous to Cluster 3

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror asynchronous from Cluster 1 to Cluster 3

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror Synchronous from Cluster 2 to Cluster 3

36. You are the administrator of your company's ONTAP clusters. You are asked toprovide a disaster recovery solution between your primary AFF A400 cluster and your FAS2720 cluster with the highest possible availability at the lowest possible price.

In this scenario, which product will satisfy this requirement?

MetroCluster

SM-S

SnapMirror

SVM-DR

37. You are asked to implement a DR solution to protect employee home directories on the primary cluster. The solution should provide an PRO of one hour, disaster recovery and archivingconfigured on the same destination volume of the DR cluster. Your solution should also reduce the amount of secondary storage requirements and use lower network traffic on the WAN links.

In this scenario, which NetApp replication technology satisfies these requirements?

SnapMirror-Sync

SyncMirror

MetroCluster

SnapMirror

38. You recently set up a SnapMirror relationship with a daily update schedule. You want to verify that the updates are being performed daily.

Which two actions inside OnCommand System Manager would you ensure that the SnapMirrortransfers are occurring daily? (Choose two.)

In the Jobs window, verify that all manual Snapshot copy operations have completed in the past 24 hours.

In the Jobs window, verify that all SnapMirror jobs have completed within the past 24 hours.

Inthe Relationships window, verify that the relationship state was broken in the past 24 hours.

In the Relationships window, verify that the lag time is less than 24 hours.

39. When you configure a SnapLock feature, where should the ComplianceClock be initialized?

on each aggregate that hosts aSnapLock volume

on each SVM that hosts a SnapLock volume

on each node that hosts a SnapLock aggregate

on all the nodes of the cluster