VMware Cloud Foundation Specialist 5V0-31.20 Dumps Questions

test2022-06-16T07:53:18+00:00

If you are preparing for 5V0-31.20 VMware Cloud Foundation Specialist exam, you should get 5V0-31.20 Dumps Questions to pass in the first try. VMware Cloud Foundation Specialist exam validates a candidate’s knowledge of how to plan for, and execute, the VCF bring up process and demonstrates knowledge of how to use and configure VMware Cloud Foundation. FreeTestShare provides one of the best quality 5V0-31.20 Dumps Questions available. Our 5V0-31.20 Dumps Questions make your preparation process simply because they are designed to help you pass your VMware 5V0-31.20 exam on the first try.

Take a free 5V0-31.20 practice exam right now to see how prepared you are!

Page 1 of 2

1. A system administrator noticed that a third-party certificate has expired in one of the VMware Cloud Foundation component resources. The administrator must replace the expired certificate.

Which pre-requisite step is required for this process?

Verify that the certificate is configured for basic authentication.

The Certificate Authority configuration files must be configured and packaged in .tar.gz file.

The valid Certificate Authority server must have the correct roles installed.

Ensure that the bring-up process is complete and successful.

2. An SDDC administrator wants to enable vSphere with Kubremetes on the Management Domain. Within the SDDC Manager, the cluster is not visible on the lists of compatible and incompatible clusters in Workload Management Deployment window

What is the reason the cluster is not visible?

The SDDC Manager excludes the Management Domain from the list of available clusters in Ul.

vSphere with Kubemetes is not supported on Management Domain in Consolidated Architecture.

The Management Domain should be stretched across two sites first.

All hosts within the vSphere chaster in Management Domain must have the proper vSphere for Kubemetes licensing.

3. An architect has been tasked with designing a stretched workload domain between two sites in an active configuration due to number of recent failures in the company’s infrastructure.

vSAN Witness Appliance can be deployed in VMware Cloud on AWS

The witness appliance should be running different version of fc:SXi as the ESXi hosts in the stretched cluster.

Static routes on the vSAN Witness host must be configured to enable network communication for the vSAN kernel traffic.

The management domain cluster must be stretched before stretching a cluster in a VI workload domain.

First cluster only in every VI workload domain can be stretched.

The vSAN Witness Appliance must be available on the same broadcast domain

4. What is required when creating storage policies for vSphere with Tanzu?

Verify that the storage policies are set and will be assigned to the Supervisor Cluster.

Ensure that the reference datastore in the storage policy is shared between all ESXi hosts in the cluster

Verify that the storage policies are set and will be assigned to the Supervisor Namespace.

Ensure that appropriate tags and attributes are added to the datastore

5. An administrator is tasked with creating a federation between five VMware Cloud Foundation instances.

What is the number of SDDC Manager instances that must be assigned the controller role to enable HA?

6. Which action must be performed to add a user to VMware Cloud foundation?

integrate VMware Identity Manager with VMware CIoud Foundation and import user accounts

Integrate VMware Cloud Foundation with Active Directory and import the account

Any account in vCenter SSO automatically allows login to VMware Cloud Foundation

Add the User or Group from the Administration dashboard in SDDC Manager

7. A new security vulnerability has been identified in SSL. The VMware vCenter appliances in the company's latest VMware Cloud Foundation environment have been found to be impacted VMware has released an updated ISO and upgrade bundle.

Which method should the administrator use to remediate this security vulnerability?

Use NSX-T Distributed Firewall to block all incoming traffic until the patch is applied.

Update VMware Cloud Foundation to a release containing the patch.

Use VMware Update Manager to apply the update.

Use VMware Lifecycle Manager to apply the update.

8. Where can NSX T be used in VMware Cloud Foundation?

in an external cluster

Only with consolidated architectures

In all architectures

Only with standard architectures

9. An administrator is deploying a workload domain that is composed of three cluster with 32 hosts each.

What is the minimum NSX-T Manager from factor that must be deployed in the VMware Cloud Foundation management domain?

Medium

Small

Large

Extra-Small

10. Which step should be followed to restore SDDC Manager using the OVF tool?

Retrieve the DNS name or IP address of a host m the management Domain

Use the host s DNS name in the host password_vault-json, and this will display the root password

Install the OVF Tool on a system in the VI Workload domain.

Move the SDDC Manager VM into the VI Workload Resource Pool.

Page 2 of 2

11. A customer would like to add capacity to run virtual machines with archiving software.

Which workload domain can he used if NFS is the principal storage?

Horizon Workload Domain

Management Domain

VI Workload Domain

Kubernetes Workload Domain

12. What is the benefit of placing vRealize Suite I ifecycle Manager on the cross-region Application Virtual Network?

vRealize Suite Lifecycle Manager cannot be placed on the cross-region network as it is reserved for Workload VMs only.

SDDC Manager uses the cross-region network to deploy vRealize Log Insight and vRealize Automation Proxy Servers, and this is not configurable.

vRealize Suite Lifecycle Manager can be deployed in cluster mode

After a recovery, an administrator can continue using the same IP address, DNS record, and routing configuration

13. Which architectural deployment type/model is supported?

In a standard VMware Cloud Foundation 4.x architecture, a VMware Lifecycle Manager appliance is deployed in each Workload Domain

In a standard VMware Cloud Foundation 4 x architecture, each Workload Domain hosts its own vCenter server.

In a consolidated VMware Cloud foundation 4 x architecture, workload VMs and Management VMs must share the same resource pool.

In a consolidated VMware Cloud Foundation 4.x architecture, VMware vRealize Automation is deployed in the Management Workload Domain.

14. Which two statements are correct about VMware Cloud Foundation (VCF) license editions'' (Choose two)

VCF Enterprise Edition has the capability to use Tanzu Kubemetes services on vSphere.

VCF Starter Edition allows stretching clusters across multiple availability zones.

All VCF license editions include automated deployment and lifecycle management of VCI components

VCF Advanced Edition allows large-scale migrations from old environments to VCF

All VCF license editions have the capability of automated deployment and lifecycle management of user workloads

15. What is the correct syntax to collect SDDC Manager logs to Amp folder while performing health check?

/usr/bin/sddc-support/sos ―api-Jogs ―log-dir /tmp

/usr/bin/sddc-support/sos ―sddc-manager-logs ―log-dir/tmp

/opt/vmware/sddc-support/sos ― sddc-manager-logs ―log-dir /tmp

/opt/vmware/sddc support/sos ―sddc-manager-logs ―Jog dir /tmp ―no-health-check

16. An architect is tasked with designing a new VMware Cloud Foundation environment. The company will purchase vSAN Ready Nodes for the management cluster but wants to make use of existing investments where possible, including a significant investment made recently in an all-flash storage array and 16GB FC fabric. The design must include this array wherever possible.

The company wishes to reuse existing ToR switching that will provide four 10GPs Ethernet connection to each host and one 1Gbps out of band connection. The network will be a standard spine and leaf topology with no layer-2 shared between racks of infrastructure. The ToR switches are each connected to 4 spine switches, with one 10Gbps connection. The clusters must be spread across at-least four racks to ensure maximum resiliency.

Which two constraints impact this design? (Choose two)

The use of an existing storage array.

VMFS does not support FC SAN with VMware Cloud Foundation

More than one availability design is needed.

The management domain must be contained within one rack.

A spine and leaf topology is used.

17. What is the advantage of using spwie and leaf underlay network over hierarchical multi-tier topology used in VMware Cloud Foundation?

It provides greater flexibility especially when scaling out.

It supports 10 CiB/s connections for ESXi hosts.

It is required to support containers in VMware Cloud Foundation.

It is the only topology supported in VMware Cloud Foundation

18. 1.Which role is required to edit backup configuration in SDDC Manager?

SUPER ADMIN

POWER USER

ADMIN

OPERATOR

VMware Cloud Foundation Specialist 5V0-31.20 Dumps Questions

VMware Cloud Foundation Specialist 5V0-31.20 Dumps Questions

Share this post

Author

Leave a Reply Cancel reply

Related Posts