2022 Free NetApp NCIE-SAN ONTAP NS0-520 Practice Exam Questions

test2022-04-26T06:34:09+00:00

Want to get free NS0-520 practice exam questions? NS0-520 exam includes 60 test questions, with an allotted time of 1-1/2 hours to complete. NCIE-SAN Specialist, ONTAP candidates must first achieve the NetApp Certified Data Administrator (NCDA) NS0-162 certification. FreeTestShare NS0-520 Practice Exam offer 100% real exam questions and answers that you’ll encounter on the real exam. NS0-520 Practice Exam questions will help you better comprehend the information included in the actual exam. You will be able to pass the NetApp NS0-520 exam with flying colors if you use our practice questions and answers.

To help you prepare for the exam, take a free NS0-520 practice test.

Page 1 of 9

1. To restore a qtree protected with SnapVault from the secondary storage system to the primary storage system, you can ____. (Choose two.)

restore to a non existing qtree with DOT 7.2

add the new qtree to the primary storage system with DOT 7.2

overwrite the existing qtree on the primary storage system with DOT 7.3

delete the existing qtree from the secondary storage system with DOT 7.3

2. Exhibit:

cl01::> net int show Cvserver

svm1

(network interface show)

Logical Status Network

Current Current Is

Vserver Interface Admin/Oper

Address/Mask Node Port Home

----------- --------- ------

---- ------------------ -----

------- ------ ----

svm1

fc_lif1 up/up

20:0b:00:a0:98:4e:ba:14

cl01-01 3a true

fc_lif2 up/up

20:0c:00:a0:98:4e:ba:14

cl01-02 3a true

lif1 up/up 172.16.21.31/24

cl01-01 a0a true

lif2 up/up 172.16.21.32/24

cl01-02 a0a true

4 entries were displayed.

cl01::>

Referring to the exhibit, a customer needs to move LIF “fc_lif1” to a new port.

Which three actions must be performed to accomplish this task? (Choose three.)

Remove LIF from the existing portset.

Quiesce all hosts accessing LUNs over the LI

Take the LIF offline.

Update the switch zone to include the new WWP

Move the LIF to a new home port using thenetwork interface modifycommand.

3. A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the state of the ____ at the time the snapshot was created.

qtrees

volume

directory

storage system

4. As a system administrator, you perform a routine check of available storage space on your FAS2750. You notice that the vol_1 volume is approaching 100% capacity. The volume is configured with the space guarantee set to volume and the LUN reservation is disabled. You want to free up space in the volume without increasing its size.

Which action would accomplish this task?

Increase the size of the LU

Increase the Snapshot Reserve.

Increase the aggregate size.

Use deduplication.

5. You are planning to expand a SAN-only ONTAP 9.5 cluster that consists of eight AFF A700 nodes.

In this scenario, what is the maximum number of additional AFF A700 nodes that would be added?

6. Exhibit.

A customer has an AFF A200 with a LUN residing in a volume by Node 4. The default Selection Mapping settings are effect. During a planned takeover cluster test, Node 3 performs a take over of Node 4.

Referring to the exhibit, what is the expected number of paths seen from the host?

7. What are two methods of protecting LUN overwrites using Snapshot copies on a volume with fractional reserve set to 0%? (Choose two.)

Snap Autodelete

iGroup throttle

LUN reset

Volume AutoSize

8. You have an SVM that serves LUNs to your hosts in an FC SAN environment. This SVM runs on a 4-node cluster and has two data LIFs on each node, according to best practices. You just created a LUN and mapped it to your initiators group. The LUN is owned by node01.

In this scenario, what would be an appropriate test for LUN mobility?

Move the LUN to node02.

Mirror the LUN to another node in your cluster.

Physically disconnect the SAN ports, and verify if the SAN data LIFs automatically move to other hosts.

Copy the LUN to another node and create a new LUN map.

9. Referring to the exhibit, which container gains space savings from deduplication, compression and compaction?

the aggregate

the qtree

the volume

the LUN

10. You have a thin-provisioned LUN that was created by using the lun create -vserver vs1 C path /vol/vol1/lun1 -size 500G -ostype windows 2008 -space-reserve disabled -space-allocation disabled command. You verify that your Windows 2016 host reports 200 GB free on lun1. However, lun1 shows 0 bytes free on the storage cluster.

What should you do to solve this problem?

Change the LUN -space-allocation parameter to enabled.

Change the LUN -ostype parameter to windows_gpt.

Change the LUN -space-reserve parameter to enabled.

Rescan the LUN disk in your Windows host so that it will notify NetApp about the free space.

Page 2 of 9

11. How do you configure the iSCSI-SendTargets datastore when the datastore is provisioned from NetApp storage?

You must configure jumbo frames when SendTargets-based iSCSI is used.

Use static discovery to add the target IQ

Use dynamic discovery to add the target IQ

You must configure a single protocol on the SVM when SendTargets-based iSCSI is used.

12. Which two Volume SnapMirror (VSM) relationship are supported? (Choose two.)

Data ONTAP 8.0.2 64-bit -->Data ONTAP 8.1 64-bit

Data ONTAP 8.0.2 32-bit --> Data ONTAP 8.0.2 64-bit

Data ONTAP 7.3.2 32-bit --> Data ONTAP 8.1 64-bit

Data ONTAP 7.3.2 32-bit --> Data ONTAP 8.0.2 64-bit

13. Exhibit:

Referring to the exhibit, which two configuration elements are required to configure an SVM to support NVMe on Red Hat Enterprise Linux? (Choose two.)

In Data Protocols, choose only the NVMe protocol.

Set the security style to UNI

Set the security style to Mixed (UNIX and NTFS).

In Data Protocols, choose both FC/FCoE and NVMe protocols.

14. You use iSCSI to present a LUN to a newly installed Windows 2016 Server. You have created the volume and LUN on the NetApp cluster. When you perform a hardware rescan on the Windows host, you cannot see the newly presented storage.

What are three reasons for this problem? (Choose three.)

The protocol has not been enabled on the NetApp cluster.

You need to add the IQN of the Windows host to the newly created LU

The IQN of the Windows host is not included in the igroup for the new LU

The wrong igroup has been associated with the new LU

The volume has not been enabled for iSCSI access.

15. If the security style is set to UNIX, CIFS client file access is determined by ____.

NT ACLs

the last client to set permissions

the mapped UNIX UID/GID of the CIFS client and the UNIX file permissions

This is not allowed: A CIFS client cannot access files in a path set to a security style of UNIX

16. You are asked to troubleshoot performance issues in a customer's SAN environment. After reviewing the NetApp SAN and hosts for best practices, you have narrowed down the issues to the fabric switches.

In this scenario, which component should be verified?

F_port config

FLOGI database

loss sig counters

BB_Credit counters

17. When using a Protection Manager policy to manage Open Systems SnapVault backups on a UNIX server, which three are valid objects to include in the data set? (Choose three.)

A file

A qtree

A directory

Theentire client

18. You are called to help with a new customer's SAN environment that consists of an 8-node AFF A700 cluster, Cisco MDS fabric switches, and Cisco UCS servers.

Which two tools would help you to assess the environment? (Choose two.)

NetApp ONTAP Mediator

Active IQ Upgrade Advisor

Active IQ OneCollect

Brocade SAN Health

19. An administrator configures NVMe within an SVM for a test environment. The administrator creates an NVMe namespace and an NVMe subsystem. The administrator then maps the namespace to the subsystem.

However, when the administrator establishes a connection to a supported host, the following error message appears:

No discovery log entries to fetch.

What is the solution to this error?

Add the host WWPN to the subsystem

Disable the host HBA and re-enable it to clear the buffers

Add the host NQN to the subsystem

Use the nvme ns-rescan /dev/nvme0 command to rescan the bus

20. Which information-gathering command should you use to gather logs for troubleshooting switch information for your Brocade switches?

cfgshow

fabricshow

configshow

supportsave

Page 3 of 9

21. Executing this command will have what effect?

options wafl.default_security_style ntfs

It will set the security style of all files to be ntfs.

It will change the security style of all qtrees to be ntfs.

It will change the security style of all existing volumes to be ntfs.

It will set the security style of all newly created volumes to ntfs.

22. Microsoft ODX supports which scenario on ONTAP 9.3?

moving a VHDX with both SMB 3.0 and SAN protocols as either source or destination

moving a VHDX from a SAN LUN source to a SAN LUN destination with no SMB support

moving a VHDX from an SMB 3.0 source to an SMB 3.0 destination with no SAN support

moving a VHDX with both SMB 2.1 and SAN protocols as either source or destination

23. You are provisioning a LUN using an ISCSI initiator on an ESX host. You disable Ethernet flow control for all ports but are experiencing Performance issues.

In this scenario, which two actions would improve the performance issue? (Choose two.)

Set the MTU settings 1500 for optimal performance.

Dedicate your ports to ISCSI traffic.

Enable jumbo frames across the entire data path.

Confirm that your host .mil storage polls are connected to a different network.

24. Exhibit.

Referring to the exhibit, which two statements are true? (Choose two.)

The volume guarantee has no effect.

LUN overwrites are guaranteed.

The LUN might run out of space.

The LUN space reservation has no effect.

25. A customer wants to add a 2-port, 32 Gb FC card to support NVMe in an AFF A700 2-node cluster. Currently, there are cards in slots 1, 2, 4, 6, 8, and 9.

Referring to the exhibit, what is the number of the slot that should be used?

26. Which Data ONTAP option sets system-wide for all transfers?

Options transfers.wide.enable

Options transfer.throttle.enable

Option replication.wide.enable

Options replication.throttle.enable

27. Which command will show the FCP target(s) on a storage system?

fcp show adapter

fcp show all

fcp show -t

fcp status

28. A customer has a clustered Data ONTAP solution and needs to connect several Windows 2012 servers using iSCSI for LUN access.

Before the LUN can be seen, what must be configured on the host?

the LUN partitioning

the Host Utilities Kit

the iSCSI software initiator

the HBA queue depth

29. Exhibit:

Based on the exhibit, you are configuring a 4-node cluster with an iSCSI LIF ob each node. You connect using the first LIF from a Windows Server 2012 host.

How would you add the other three LIFs?

Use the MCS button.

Use the Devices button.

Use the Add session button.

Wait and then press the Refresh button until the other sessions appear.

30. You are planning to set up a new SAN with an AFF A300 2-node switchless cluster. Your SAN fabric will consist of Cisco MDS9148s switches.

According to NetApp best practices, which two actions would be required to accomplish this task? (Choose two.)

Set the switchport speed setting to 16 G

Use single initiator, multiple target zoning.

Use multiple initiator, single target zoning.

Set the switchport speed to auto negotiate.

Page 4 of 9

31. Exhibit.

Referring to the exhibit, which type of zoning should be used?

a WWPN with a single initiator and multiple targets

a WWPN with a single initiator and a single target

a WWNN with a single initiator and multiple targets

a WWNN with a single Initiator and a single target

32. In a Fibre Channel configuration, the host's HBA is referred to as the ____, and the storage system's HBA is referred to as the ____.

initiator, target

primary, secondary

secondary, primary

target, initiator

33. What utility on the storage system will allow you to capture network packet information?

Snoop

Netstats

Pktt

Traceroute

34. Within the NetApp Interoperability Matrix Tool (IMT), which three components are supported for the FC SAN storage host solution? (Choose three.)

Host OS

IP switch

ONTAP OS

Netapp Controller Model

Host HBA

35. Automatic host-side space management with SCSI T10 thin-provisioned LUNs is achieved by which feature of ONTAP?

fractional reserve

space allocation

space reservation

volume auto-grow

36. An administrator needs to determine the maximum volume size that is supported per operating system.

Which resource has this information?

Interoperability Matrix Tool (IMT)

OneCollect

Config Advisor

Hardware Universe (HWU)

37. An enterprise customer has both a NetApp FAS8200 4-node cluster and a third-party storage array in a shared SAN environment. The host servers connect to both storage vendors' arrays in the fabric.

Regarding the hosts in this scenario, what are- two NetApp best practices when performing this task? (Choose two.)

Set the default timeout values and storage parameters for the host system.

Provide isolation between storage systems using NetApp's multitenancy feature.

Always use the same adapter for heterogeneous storage systems.

Use separate adapters to connect to each vendors' storage system.

38. The qtree specified for ____ must not exist on the secondary system before you run the ____ command.

pri_qtree_path, snapvault start

sec_qtree_path, snapvault start

pri_qtree_path, snapvault initialize

sec_qtree_path, snapvault initialize

39. Exhibit.

A customer is testing a dual-fabric FC SAN configuration as shown in the exhibit and the zones are implemented on the switches shown below.

If all the nodes are in the SLM reporting nodes list, hoe many path per LUN should the customer expect when simulating an FC SFP failure by bringing LIF_3 offline?

15 paths

3 paths

4 paths

7 paths

40. Which formula is appropriate for calculating target port Queue Depth?

The number of LIFs using a physical port * 256

The sum of the Queue Depth setting for all hosts using a physical port

The number of LIFs using the physical port * Maximum Host HBA Queue Depth setting

The number of physical ports * 2048

Page 5 of 9

41. Which command on the storage system allows you to display statistics on the performance of system resource such as CPU, NVRAM, network interfaces, and disks?

netstat

netdiag

pktt

sysstat

42. When using MetroCluster in a forced takeover mode, identify two methods for restricting access to the disaster site node. (Choose two.)

Use manual fencing

Use the cf giveback -f command

Use the cf forcetakeover -d command

Turn off power to the disaster site node

Isolate the failed node from the surviving node

43. Before running lun setup on the storage system, you must first create the igroup to which the initiator will be attached.

True

False

44. You have an AFF A220 cluster connected to a dual fabric topology. You must ensure that SAN hosts do not lose access to LUNs during unplanned failures.

Which two operations should be performed to accomplish this task? (Choose two.)

Manually set all LUNs offline.

Manually set all FC LIFs on a single node to "down".

Turn the power off on one disk shelf.

Initiate a reboot of one Fibre Channel switch.

45. Which three attributes would you specify when creating a LUN? (Choose three.)

The host operating system of the system attached to LU

The version of Data ONTA

The size of the LU

The path to the LU

46. You have a 4-node FAS8200 A300 cluster that are using ONTAP 9.3 default settings. For faster performance, you move a volume with LUNs from a node on the FAS8200 to a node on the AFF A300. You determine that your SAN host is still using all active/optimized FC paths to the FAS8300 HA pair.

What do you need to troubleshoot to move all active/optimized FC paths to the AFF A300 HA pair?

reporting nodes list

host MPIO and ALUA

LUN mapping

igroup WWPNs

47. On your ONTAP 9.5 cluster, you need to set up the onboard key manager with hardware-based security and volume encryption.

Which two licenses are required in this situation? (Choose two.)

FDE

TPM

RSA

48. The root admin on the UNIX box receives an "Access Denied" message when he attempts to access a newly mounted qtree.

What's the most likely cause of this error?

The qtree is missing from the /etc/hosts file.

NFS is turned off on the storage system.

The qtree is set to ntfs security style.

The qtree has not been exported.

49. For automatic user name mapping to occur for a CIFS and UNIX user name that are the same, you must do what?

Enter the CIFS user in the NIS database.

Enter the user names in the /etc/hosts.equiv file.

Use both a NIS server and a Domain Controller in the network.

Nothing: mapping will occur if user name authentication is available.

50. A customer wants to move its iSCSI SAN data from the edge locations into the cloud for data analytics, while keeping the ability to access modify the data.

Which two combined solutions meet the customer's requirements in this scenario? (Choose two.)

Use Microsoft Azure compute resources to access the near cloud AFF SnapMirror data for analytics.

Deploy ONTAP Cloud at edge locations find use SnapVault to move the data into an AFF onpremises data center.

Deploy ONTAP Select at edge locations and use SnapMirror to move the data to AFF near cloud with the NetApp Private Storage (NPS) service.

Use Amazon Web Services (AWS) compute resources to access ONTAP Select data at the edge office locations for analytics.

Page 6 of 9

51. You currently have the following configuration on your cluster:

cl01::>igroup show Cinstance

Vserver Name: svm1

Igroup Name: ig2

Protocol: mixed

OS Type: linux

Portset Binding Igroup: C

Igroup UUID: 3fb136c7Ccfd6C11dfCa9abC123478563412

Initiators: C

What must you do to limit the LIFs that are used by an initiator to access a LUN?

Create a portset.

Create an additional igroup.

Change the protocol to iSCS

Change the OS type to windows_gpt.

52. In a 4-node cluster, how many iSCSI LIFs will be created from the SVM setup wizard?

53. A storage administrator is setting up a Red Hat Enterprise Linux 8.1 system to use NVMe storage in ONTAP 9.7. In this scenario, which action is required?

Set up the Red Hat auto mounter.

Load the FC HBA drivers.

Set up ALU

Load the Ethernet drivers.

54. The snapvault update command is only available on the secondary system.

True

False

55. An administrator needs to connect a new VMware 6.5 cluster to an ONTAP cluster for iSCSl connectivity.

Which two steps would accomplish this task? (Choose two.)

Enable iSCSl adapters on the ESXi hosts.

Install the Virtual Storage Console for VMware vSphere.

Configure zoning for the HBAs and the ONTAP data LIFs.

Configure ALUA on the ONTAP SV

56. Inside of an SVM, an iSCSI IP address is defined on which object?

qtree

LUN

LIF

node part

57. To determine if a problem you are experiencing is known to NetApp, use the NOW site ____ utility.

System Configuration Guide

Bugs Online/Release Comparison

AutoSupport

Ethereal

58. An administrator is asked to configure NVMe on an ONTAP 9.5 cluster for host access.

Which three steps must the administrator perform to accomplish this task? (Choose three.)

Create a namespace

Provision a subsystem

Configure the FC port

Gather the IQN from the host initiator software

Gather the NQN from the host system

59. An administrator is adding new hosts to a vSphere cluster. The cluster uses the FC protocol to connect to a NetApp cluster. The administrator wants to configure the multipathing for the ESXi host.

Which NetApp tool should be used to accomplish this task?

OnCommand System Manager (OCSM)

Host Utilities

SnapCenter plug-in

NetApp Virtual Storage Console (VSC)

60. An administrator reviews the Upgrade Advisor before performing an upgrade of their ONTAP cluster.

What information is detailed in the report? (Choose two.)

pre-upgrade checks

performance metrics

risk exposures

cluster interconnect checks

Page 7 of 9

61. You are troubleshooting a clustered failover problem at a customer site. The customer explains that both storage systems were NFS mounted onto the Solaris host.

While in takeover mode, you attempt to create a file on the NFS mount point for the inaccessible system, but you get the following error:

NFS server filer2 not responding still trying.

When not in takeover mode, both storage systems operate normally and you do not get the error. You perform a "cf giveback" and you can now create a file over NFS on both systems.

What should you do first to resolve this issue?

Replace the NIC adapter.

Submit a new bug report.

Use the cluster-config-checker.cgi to identify the problem and corrective action.

Replace the cluster interconnect card and run diagnostics "all" to ensure proper system operation.

62. You must relocate a LUN from one AFF A700 HA pair to another AFF A300 HA pair while preserving all storage efficiencies.

What are two ways to accomplish this task? (Choose two.)

Copy the volume.

Copy the LU

Move the volume.

Move the LU

63. A customer wants to use both Cisco FC and FCoE switches in their ONTAP environment.

According to NetApp best practices, what are two requirements in this scenario? (Choose two.)

You must use single initiator zoning.

You must create interface groups to isolate FC and FCoE LIFs.

You must create a trunk with multiple virtual LANs.

You must not have more than one target UF for the same physical port in a single fabric zone.

64. You are planning to implement a 32 Gb FC SAN on a 2-node AFF A700 ONTAP 9.5 cluster. You need to create 112 FC LIFs across the HA pair with a limit of 20 FC LIFs per physical HBA port.

In this scenario, how many 2-port 32 Gb HBA cards do you need per storage controller?

65. Which command can you use to determine the state of the FC ports for a Brocade switch?

switchreveal

switchview

switchshow

switchstatus

switchstate

66. Which set of protocols provide block-level access to NetApp storage?

SNA and RPC

iSCSI and FCP

HTTP and FTP

CIFS and NFS

67. A company has 20 ESX hosts. Ten of the hosts are connected using FC, and the rest are connected over iSCSI. The FC host HBA queue depth is set to 32, and the iSCSI LUN queue depth is set to 64. The FC hosts are now experiencing random connectivity issues.

In this scenario, what would be the reason for the disconnects?

The FC host has a lower queue depth.

According to the IMT, unsupported HBA firmware is in use.

All of the hosts are part of the same cluster.

The queue depth is not consistent across the cluster.

68. Referring to the exhibit, which design solution is shown?

single-fabric HA pair

multifabric single-node

single-fabric single-node

multifabric HA pair

69. An administrator is planning a hardware refresh and data migration from a Data ONTAP 7.3 system to new AFF A3-00 cluster that is using ONTAP 9.0. The Mode system only serves FC LUNs to a Windows 2012Rs server cluster that needs to remain connected after migration.

Referring to the scenario, which method would be used for the LUN migration.

Unified Host Utility Kit

7-Mode Transition Tool (7MIT)

Foreign LUN import (FLI)

Oncommand system Manager

70. You are deploying an 8-node FAS8200 ONTAP cluster and attaching to an existing FC fabric.

Which two ONTAP features would be used to restrict or limit the available paths seen from the host? (Choose two.)

port sets

igroup

VIAN

Selective LUN Map

Page 8 of 9

71. Which path selection policy is used by Windows Servers using NetApp LUNs that are greater than 2 TB?

Least Queue Depth

Round Robin

Round Robin with Subset Policy

Least Weighted Paths

72. com.microsoft: host1

LUN Node: cl01-04

Reporting Nodes: cl01-01,

cl01-02, cl01-03, cl01-04

You have a 2-node cluster. You have added an HA pair with all flash drives for a high-performance database that is currently experiencing performance problems on SAS drives. The LUN shown in the exhibit is moved from cl01-01 to cl01-04 to address the problems.

What is the next step in this scenario?

Rescan the host to discover the new LUN location.

Remove the old path entries from the host.

Remove the previous owner and partner from the reporting nodes list.

Unmap the LUN, then remap the LU

73. Which two are Data ONTAP commands for creating LUNs on a storage system? (Choose two.)

lun create

lun config

lun make

lun setup

74. You are asked to provision a 500 GB LUN to a Windows 2016 host with the iSCSI protocol on an AFF A220. This is the first time that any LUN has been provisioned for iSCSI.

What must you do on the AFF A220 to accomplish this task?

Start the iSCSI service on the cluster.

Start the iSCSI service on the SV

Start the iSNS service on the cluster.

Start the iSCSI service on the LI

75. Which three statements are true when using SnapRestore? (Choose three.)

The volume must be online

SnapRestore must be licensed before you can use it

The snap restore enable on option must be enabled

The volume to be reverted must not be a SnapMirror destination mirror

76. A customer's NetApp infrastructure is reaching end-of-life (EOL), and they want to inventory their NetApp cluster. The customer wants to make sure that the proposed technical refresh satisfies their growing data demands.

Which two tools would you use to help with this recommendation? (Choose two.)

Upgrade Advisor

OneCollect

Config Advisor

Active IQ

77. What security mechanism can an administrator use on an OSSV client to use permissionsallowing backup to a SnapVault secondary system?

MD5 authentication between SnapVault primary and secondary, with changeable password

Contents inside file called access and located in OSSV /snapvault/etc

QSM access list modifiable via svconfigurator

Via /etc/hosts.equiv file

78. Which tool collects configuration data from hosts and switches to assist in evaluating a qualified configuration?

System Manager

sysstat. command

SnapCenter

OneCollect

79. A Windows 2012 Server has a 1 GB thin-provisioned LUN in a 10 GB thin-provisioned volume. After copying a 500 MB file to the LUN, you observe the LUN using 500 MB of space in the volume. After deleting the 500 MB file, you observe the LUN is still using 500 MB of space in the volume.

Which two steps are required to reclaim the space? (Choose two.)

Press Optimize in the Windows Defragment and Optimize Drives utility.

Enablespace-allocationon the LU

Run TRIM on the host.

Empty the Recycle Bin on the host.

80. For aggregates or traditional volume SyncMirror to work correctly, the configuration of each plex should be identical with regard to ____.

NVRAM

Mirrored Snapshot copies

RAID groups and disk sizes

NDMP and Snapshot copies

Page 9 of 9

81. An administrator has an AFF A200 cluster at their primary site that is used for FC connectivity to servers. For disaster recovery purposes they want to start replicating their data to another AFF A3Q0 cluster In a secondary location.

The AFF A300 is In a site that has no FC or FCoE capable switches, and is currently only used for CIFS data. A cluster peering relationship already exists between the two clusters.

Which three additional actions are needed for the data to be ready for access from hosts at the secondary site? (Choose three.)

Create zones with the appropriate initiators and targets for the secondary site.

Enable the iSCSI service on the SVM at the secondary site.

Replicate the data from the primary site to the secondary site with SnapMirror.

Create new iSCSI igroups for LUN mapping.

Enable the iSCSI service on the SVM at the primary site.

82. Which data collection tool would be used for obtaining detailed information about hosts that are attached to ONTAP storage?

Upgrade Advisor

OneCollect

Brocade Network Advisor

Conflg Advisor

83. Exhibit.

You are adding a boot LUN for a new server. The server uses FCP attached through a CNA. The ONTAP cluster is also attached to the same fabric by way of UTA2. You configure the zoning for the fabric as shown in the exhibit. You discover that the server cannot see its boot LUN.

What is the problem with your zoning configuration?

The zone set must have the same name as the zone.

The zone was not activated.

The zone used a wrong zone I

The WWPN for the NetApp LIF is incorrect.

84. 1.Exhibit.

A customer is testing a dual-fabric FC SAN configuration as shown in the exhibit.

The zones are implemented on the switches shown below.

Switch 1 /Zone 1: HBA 0, LIF_1, LIF_3, LIF_5, and LIF_7

Switch 2 /Zone 2: HBA 1, LIF_2, LIF_1, LIF_6, and LIF_8

IF all the nodes are in the SLM reporting nodes list, how many paths per LUN should the customer expect when simulating a node failure by powering off Node 04?

4 paths

6 paths

8 paths

2 paths

85. An administrator has expanded a 2-node ONTAP cluster to a 4-node ONTAP cluster. The cluster is using FC LUNs with all of the default settings. You must rebalance the LUNs to the new nodes.

Which configuration must be made to achieve this requirement?

The new nodes must be added to the reporting nodes list.

All nodes must be removed from the reporting nodes list.

The original nodes must be added to the reporting nodes list.

The original nodes must be removed from the reporting nodes list.