HPE0-J58 Real Questions For Designing Multi-Site HPE Storage Solutions Exam

test2022-04-08T03:50:08+00:00

Looking for HPE0-J58 Real Questions? Designing Multi-Site HPE Storage Solutions Exam tests the ability to design and deliver a complete and supported multi-site, multi-array and/or complex storage solution that meets customer requirements. To pass the HPE0-J58 test on the first try, you must have accurate syllabus information and an excellent study guide. FreeTestShare 100 percent genuine HPE0-J58 real questions give you in-depth knowledge of the exam syllabus and help you pass your exam easily in your first try.

To put your skills to the test, try HPE0-J58 free practice questions!

Page 1 of 3

1. Which advantage does InfoSight for HPE Storage deliver to a customer?

automatic firmware download and deployment for Nimble storage arrays

online ordering of required capacity and license upgrades

intelligence in the customer datacenter

an AI recommendation engine to predict issues and analyze root causes

2. Two companies merged. The IT department needs a temporary solution to communicate between the two companies' SAN Infrastructure until they can redesign and merge the two fabrics together.

Both companies have B-Series switches that are capable of using Fibre Channel to Fiber Channel routing.

Which zoning option will meet the customer's needs?

LSAN Zoning

Quality of Service Zoning

Peer zoning

Traffic Isolation Zoning

3. A customer has HPE B-series switches and is not interested in Extended Fabric licenses for edge switches.

They have sites over 10km apart.

Which SAN extension technology should you recommend?

FC over DWDM

FC over CWDM

FCoE

FCIP

4. A customer has two HPE Nimble arrays that are replication partners. The customer suffers a complete outage on the source array.

What does the administrator need to do to make the most recent snapshot available?

Verify the automatic failover occurred

Promote the target snapshot

Demote the source snapshot

Perform a handover between the arrays

5. You are proposing StoreOnce as a new backup target.

Which features should you emphasize that will help the customer protect and recover data from external

attacks on local data? (Select two.)

StoreOnce Catalyst stores are only accessible via the API

StoreOnce has firewalls to protect the repositories

StoreOnce is immune from ransomware

StoreOnce has malware protection

StoreOnce has encryption of data at rest and data in-flight

6. A customer needs to replace their outdated storage arrays.

Which resource provides the necessary information to properly size a solution?

HPE NinjaCrawler

HPE Ninja Stars for Nimble

HPE Storage Sizer

HPE Storage Assessment Foundry

7. A customer asks you (o design a solution to protect their existing ERP solution. The solution must allow them to achieve an RTO of ten minutes and an rpo of zero minutes. The existing ERP solution is running on an HPE 3PAR Ail Flash Array, the customer has a I)R facility, hut they do not have any I)H storage arrays in addition to installing a new array in the DR facility, which data protection should you recommend to achieve the customer goals?

Periodic Asynchronous Remote Copy

synchronous Remote copy

Asynchronous Remote Copy

Peer Persistence

8. A customer needs lo replace an existing Dell EMC backup-to-disk solution with an HPE solution to integrate with an HPE 3PAR solution.

Which toot should you use lo begin your assessment of the customer environment?

HPE inToSight

DD Analyzer

SAF Analyse

Ninja Crawler

9. You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected

to develop reports for a new proposal.

What must you do first to begin the process?

Create a single .zip file of all data exports

Create a new opportunity

Create a gatekeeper on your SAF utility server

Export the data as .xml

10. A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted.

Which

products support this feature without additional licenses? (Select two.)

HPE 3PAR

HPE StoreOnce VSA

HPE Nimble arrays with SmartReplicate (remote replication)

any B-series 16Gb SAN Switch

HPE StoreOnce hardware appliance

Page 2 of 3

11. A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment.

Which approach should you use to find and prove a root cause?

Use Brocade Network Advisor to gather data for analysis

Use the advanced performance reports in SSMC

Use HPE SAF Collect to gather data for SAF Analyze

Use HPE InfoSight Cross Stack Analytics

12. 1.A customer has a two-node HPE 3PAR array with three additional drive enclosures. There is a single CPG setup for RAID 5 (3+1). One of the drive enclosures has failed and must be replaced.

What needs to be considered before starling the repair?

The enclosure I'O modules will need to be paired with the replacement enclosure

A node rescue will need to be performed after the enclosure replacement.

The array must be powered down to perform the enclosure replacement.

HA cage availably will be lost during the enclosure replacement process.

13. Refer to the Exhibit.

A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.

They ask you what the current RPO level for their replication is.

How should you respond?

They need to verify the RPO level from the host vc-ms-fileserver

They have an RPO of four minutes

They need to send a screenshot of the volumes tab

They have an RPO of two minutes

14. DRAG DROP

A customer has a primary site with an HPE Nimble Storage array and a secondary site with another HPE Nimble Storage array. The customer had a planned power outage at their primary site, and now needs to switch back to the primary array.

Place the steps into the order they must be performed to switch back the primary array.

15. A customer needs a data recovery solution for their HPE 3PAR array.

They have the following requirements:

✑ RPO needs to be within three hours

✑ RTO needs to be within three hours

✑ There is no need for offsite data archive

✑ They will have a limited maintenance window Which solution meets all of the customer needs?

HPE 3PAR StoreServ with RMC

HPE StoreOnce

HPE StoreAll

HPE StoreEver

16. A customer needs a solution that will scale out with multiple arrays for replication and will guarantee increased IOPS over the life of the solution.

Which HPE program should you leverage in your solution to help meet the customer's requirements?

HPE SimpliVity HyperGuarantee

HPE Store More Guarantee

HPE Nimble Timeless storage

HPE Get 6-Nines Guarantee

17. DRAG DROP

Match the HPE resource to Its source location.

18. A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than 1km. The link latencies are within HPE recommended tolerances.

The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows

2016 servers and HPE 3PAR storage.

What are characteristics of the Quorum Witness? (Select two.)

A virtual implementation of the Peer Persistence Quorum Witness is required on a third site

A Peer Persistence Quorum Witness is required for normal HPE 3PAR Peer Persistence operation

The Quorum Witness initiates the fail-over, passing control to the standby array

A physical implementation of the Peer Persistence Quorum Witness is required on a third site

Quorum Witness becomes relevant only during 3PAR Peer Persistence failover

19. A customer established a remote site with an HPE 3PAR 2O0O0 array and wants to implement Remote Copy tor data protection

The environment has these specifications

• Two locations of arrays are less than 1 km apart

• The locations are limited to an existing shared link that cannot be upgraded

• Data only changes on a weekly basis, but needs to be available if the primary site fails. Based on this information. which type of replication mode meets all these needs?

Asynchronous Streaming

Asynchronous Periodic

Synchronous

Synchronous Long Distance

20. You are presenting a Remote Copy solution to a customer that expects to experience significant future growth During your presentation, the customer expresses concerns about future integrations of HPE 3PAR arrays into the replication solution.

How should you respond to address the customer concern?

HPE 3PAR 8000 arrays can only replicate to other HPE 3PAR 8000 and HPE 3PAR 7000 arrays.

Only HPE 3PAR 20000 arrays can be a replication target for 8000. 9000, and 20000 arrays.

Asynchronous Streaming replication is available on all generations of HPE 3PAR arrays.

All current and previous generation HPE 3PAR arrays can replicate data between each other

Page 3 of 3

21. A customer has a requirement to provide disaster recovery for an application. The application has an RPO of 30 mins, with an RTO of 15 mins.

How can HPE 3PAR Remote Copy help meet the customer’s specified requirements in the most cost effective manner?

by using Periodic Asynchronous Replication with an interval of 15 mins

by using Synchronous Long Distance Mode

by using Synchronous Replication

by using Streaming Asynchronous replication with an interval of 15 mins

22. Refer to the exhibit.

A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression. Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?

This data is a good candidate for HPE 3PAR deduplication

This data has a video data workload profile

This data is from an HP-UX system

This data has a block size which is not optimal for HPE 3PAR

23. A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover.

Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?

Peer Persistence

Serviceguard Metrocluster

Cluster Extension (CLX)

Site Recovery Manager

24. A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour.

After replication completed at 1:00pm, the array at the primary site suffers a power failure.

Applications were failed over successfully by the administrators, and production continued on the secondary site array as designed.

At 3:00pm, the power was restored to the primary site array.

What does the administrator need to do first to restore services in the primary site?

Perform handover from the secondary array to the primary array

Create a new replication partnership from the primary array to the secondary array

Create a new replication partnership from the secondary array to the primary array

Perform a failback of the existing replication partnership to the primary array