2022 Free Updated CCNP Data Center 350-601 DCCOR Dumps Questions

test2022-01-17T06:13:17+00:00

You must pass the CCNP Data Center 350-601 test if you want to obtain CCNP Data Center certification and further your networking profession. FreeTestShare updated CCNP Data Center 350-601 DCCOR Dumps contain actual CCNP Data Center questions and answers that have been verified and updated to ensure accuracy. FreeTestShare provides a free CCNP Data Center 350-601 demo with real exam questions and answers to assist you to understand the exam topics and format.

Page 1 of 4

1. An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch .

Which action must be taken?

The FCNS database must be disabled in the fabric.

A port channel must be configured to the upstream switch.

All switches in the fabric must be Cisco MDS switches.

NPIV must be enabled on the upstream switch.

2. Refer to the exhibit.

What is the result of this series of commands?

It reboots the server immediately.

It verifies the firmware update on the server.

It activates the firmware on the next adapter boot.

It updates the firmware on adapter 1/1/1 immediately.

3. Refer to the exhibit.

An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails.

Which action accomplishes this objective?

Set the pinning max-links value to 8

Statically assign each host interface to a fabric uplink

Change the supported FEX type

Configure the eight uplinks in a port channel

4. An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image .

What is expected to occur in this case?

The system defaults to the backup image version

The system defaults to and boots into GOLD firmware image

The system defaults to the GOLD firmware image

The system defaults to and boots into kickstart image

5. Refer to the exhibit.

An engineer needs to implement streaming telemetry on a cisco MDS 9000 series switch. The requirement is for the show command data to be collected every 30 seconds and sent to receivers .

Which command must be added to the configuration meet this requirement?

Sensor-grp 200 sample-period 30000

Snsr-grp 200 sample-interval 30

Sensor-grp 200 sample-period 30

Snsr-grp 200 sample-interval 30000

6. Which data structure results from running this Python code?

Set

Tuple

Dictionary

List

7. Which two authentication types does Cisco UCS Manager support when configuration authentication? (Choose two.)

local

LDAP

802.1X

Kerberos

PAM

8. Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch .

Which statement is true?

Any commands that have conflicting settings between roles are denied.

Access to a command takes priority over being denied access to a command.

The first role assigned takes precedence over subsequent roles.

The last role assigned takes precedence over previous roles.

9. Which method must a network engineer use to upgrade the BIOS firmware of a Cisco UCS standalone C-Series reck-mount server?

Use the Cisco host upgrade utility.

Use the Cisco hardware upgrade utility.

Use the Cisco host firmware policy.

Use the U-ACPI Interface.

10. An engineer must configure HTTPS secure management for Cisco UCS Manager using a key ring named kr2016 and a key size of 1024 bits. The environment consists of a primary fabric interconnect named UCS-A and a secondary fabric interconnect named UCS-B .

Which command sequence must be used to accomplish this goal?

Option A

Option B

Option C

Option D

Page 2 of 4

11. Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?

A)

Option A

Option B

Option C

Option D

12. Which two configuration settings are available in the in the cisco UCS flmware Auto sync server policy?

User Notification

User Acknowledge

No Action

Delayed Action

Immediate Action

13. Refer to the exhibit.

Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?

Configure the interface of the DHCP server as untrusted.

Configure the IP address of the DHCP server.

Enable the DHCP relay agent.

Verify the DHCP snooping bindings.

14. DRAG DROP

An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.

Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

15. An engineer is implementing an import operation in Cisco UCS Manager .

What is the impact of performing this operation?

A configuration can be imported from a higher release to a lower release.

Information can be modified on the management plane only.

Only a configuration file that was exported from the same Cisco UCS Manager can be imported.

An import operation can be scheduled.

16. Refer to the exhibit.

Which setting must be configured to prevent reuse of passwords?

No Change Interval

Change Interval

History Count

Change Count

17. Refer to the exhibit.

A host with source address 10.10.10.10. sends traffic to multicast group 239.1.1.1.

How do the vPC switches forward the multicast traffic?

If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only one Po20.

If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20.

If multicast traffic is received on Po11 and Switch2, the traffic is dropped.

If multicast traffic is received on Switch over the vPC peer-link, the traffic is dropped.

18. Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nexus 7000 series switch is deployed?

NX-API

LLDP

Open Agent Container

Bash shell

19. An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engineer must ensure that frames between the source and the destination follow the same links for a specific flow. Subsequent flows are allowed to use a different link.

Which load balancing method should be used to accomplish this goal?

src-id/dst-id

src-dst-oui

src-dst-port

src-id/dst-id/oxid

20. An engineer is implementing Cisco Intersight in a secure environment. The environment must use LDAP directory service and ensure information integrity and confidentiality .

Which two steps must be taken to implement the solution? (Choose two.)

Enable Encryption for LDAP

Add a self-signed LDAP certificate to Cisco Intersight.

Enable Certificate Signing Request in Cisco Intersight.

Add a trusted root LDAP certificate to Cisco Intersight

Add a trusted OAuth token to Cisco Intersight

Page 3 of 4

21. DRAG DROP

Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:

• R1 must be the active RP.

• R2 must be the backup RP that is used only if R1 is not reachable

Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

22. AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to 1500 and then generable a massage .

What configuration will accomplish this task?

Option A

Option B

Option C

Option D

23. An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted .

Which command should be used to meet these requirements?

Idap-server host 10.10.2.2 enable-ssl

Idap-server 10.10.2.2 port 443

Idap server host 10.10.2.2 key SSL_KEY

Idap-server 10.10.2.2 key SSL_KEY

24. An engineer changed a configuration and must perform a rollback .

Which statement applies to a Cisco Nexus 5600 Series switch?

Errors are skipped when an atomic rollback type is triggered.

A user who is assigned to the network-operator user role can perform a rollback.

The configuration rollback functionality is disabled when FCoE is enabled.

A system checkpoint is generated automatically when the running configuration is saved to NVRA

25. An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master .

Which set of commands must be used to implement the scenario?

Option A

Option B

Option C

Option D

26. An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity .

What configuration should be implemented?

Option A

Option B

Option C

Option D

27. An engineer wants to create a backup of Cisco UCS Manager for disaster recovery purposes .

What are two characteristics of a full state backup of a Cisco UCS Manager database? (Choose two.)

performs a complete binary dump of the database as a .txz file

contains all of the configurations

performs a complete binary dump of the database as a bin file

performs a complete binary dump of the databases as a sql file

contains all of the runtime states and statuses but not the configurations

28. A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning” and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity.

Which configuration must be applied to meet these requirements?

Option A

Option B

Option C

Option D

29. A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature .

Which component is upgraded during the infrastructure firmware upgrade stage?

Cisco IMC

Adapter

I/O module

BIOS

30. An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment .

Which two roles can be used to configure LAN Connectivity policies? (Choose two.)

network-admin

server-profile

admin

enable

operations

Page 4 of 4

31. An engineer implements an ACI fabric and must implement microsegmentation of endpoints within the same IP subnet using a network-based attribute. The attribute mapping must allow IP subnet independence .

Which attribute must be selected?

MAC address

Custom

Tag

32. Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?

any service profile that has no host firmware policy defined

any service profile that uses a user-created host firmware policy

any service profile that is not in the root sub-org

any service profile that uses the global-default host firmware policy

33. DRAG DROP

A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.

Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.

34. Refer to the exhibit .

What is the result of executing this python code?

It backs up Cisco switches to Cisco Prime infrastructure.

It sends the switch configuration to Cisco TA

It sends a Cisco device backup to a remote destination.

It schedules a backup on a Cisco switch using EE

35. Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS .

Which action accomplishes this goal?

Reinstall the cluster to generate the default key ring certificate

Generate a new default key ring certificate from the Cisco UCS Manager

Reboot the SSO component of the Cisco UCS Manager

Regenerate the default key ring certificate manually

36. An engineer is running an ACI fabric, has VMM integration with VMware vCenter, and wants to enable microsegmentation based on vCenter VM attributes .

Which statement about microsegmentation is true?

ACI does not support microsegmentation based on vCenter VM attributes. You should use network attributes for mircosegmentation.

An ACI microsegmented EPG automatically creates a port group with a private VLAN configured on a VMware vCenter distributed virtual switch.

When enabled, microsegmentation performs distributed switching and routing on the ESXi hosts.

Microsegmentation is supported only using AVE or AV

37. An engineer is using REST API calls to configure the cisco APIC .

Which data structure must be used within a post message to receive a login token?

A. Option A

B. Option B

C. Option C

D. Option D