Access to Free 350-601 Practice Questions and Answers

test2021-11-03T07:55:54+00:00

By test 350-601, 350-601 DCCOR, 350-601 dumps, 350-601 exam dumps, 350-601 exam questions, 350-601 free dumps, 350-601 free questions, 350-601 practice test, CCIE Data Center, CCNP Data Center 0 Comments

Implementing and Operating Cisco Data Center Core Technologies v1.0 (DCCOR 350-601) is a 120-minute exam associated with the CCNP and CCIE Data Center Certifications. This exam tests a candidate’s knowledge of implementing core data center technologies including network, compute, storage network, automation, and security.

350-601 Practice Questions and Answers will help you better comprehend the information included in the actual Cisco 350-601 exam. Our Cisco 350-601 practice questions are based on actual exam questions and will help you get the necessary subject matter knowledge to pass the 350-601 exam and further your career. Take a free 350-601 practice exam right now to see how prepared you are!

Page 1 of 3

1. An engineer must configure OSPF in the data center. The external routes have already been redistributed OSPF.

The network must meet these criteria:

* The data centre servers must reach services in the cloud and the services behind the redistributed routes.

* The exit point toward the internet should be propagated only when there is a dynamically learned default route from the upstream router.

Which feature is required?

Default-information originate

Stubby area

Totally stubby area

Default-information originate always

2. The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures .

Which configuration applies the changes for module 1 only?

Option A

Option B

Option C

Option D

3. An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect .

Which backup type must be selected to meet these requirements?

all configuration

system configuration

logical configuration

full state

4. Commit the role to the switch to the active user database

5. Copy the running configuration to the startup configuration

6. DRAG DROP

A network engineer is asked to describe the cloud infrastructure models from the perspective of their operation and access to resources.

Drag and drop the descriptions from the left onto the appropriate.

7. What are two types of FC/FCoE oversubscription ratios? (Choose two.)

server storage to end-node count

port bandwidth to uplink bandwidth

edge ISL bandwidth to core ISL bandwidth

host bandwidth to storage bandwidth

switch processing power to end-node processing power

8. A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted .

Which set of steps must be taken to meet these requirements?

1 Perform a startup-config backup to an FTP server. 2 Copy startup-config in the boot flash to the running-config file

1 Perform a running-config backup to an SFTP server 2 Copy backup-config from the SFTP server to the running-config file

1 Perform a running-config backup to an SCP server 2 Copy running-config in the boot flash to the running-config file

1 Perform a startup-config backup to a TFTP server 2 Copy backup-config from the backup server to the running-config file

9. Refer to the exhibit.

A host with source address 10.10.10.10. sends traffic to multicast group 239.1.1.1.

How do the vPC switches forward the multicast traffic?

If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only one Po20.

If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20.

If multicast traffic is received on Po11 and Switch2, the traffic is dropped.

If multicast traffic is received on Switch over the vPC peer-link, the traffic is dropped.

10. Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development .

Which attribute must be used to assign the servers to different microsegments?

Data center

VMM domain

VM name

IP address

Page 2 of 3

11. Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch .

Which two technologies can be implemented to reduce disruptions to the network during the upgrade? (Choose two.)

MLAG

HSRP

PAgP

VDC

vPC

12. An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment .

Which two policies must be configured to meet these requirements? (Choose two.)

Boot Policy

Global Policy

Power Control Policy

Maintenance Policy

Reboot Policy

13. Refer to the exhibit.

Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12 .

Which two commands are needed to complete the configuration? (Choose two.)

UCS-A /org/service-profile/vnic/mon-src* # set direction both

UCS-A /eth-traffic-mon/fabric/eth-mon-session' # create dest-interface 2 12

UCS-A /org/service-profile/vnic/mon-src* # set direction receive transmit

UCS-A /eth-traffic-mon/fabric/eth-mon-session # activate

UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create eth-mon-session/dest-interface 2 12

14. An engineer configures an intersignt virtual application and must claim over 200 targets. The engineer starts the Claim target procedure.

The engineer has prepared this initial comma- separated value file to provision the targets:

Which Information must be included In the comma-separated value flit to provision the targets?

FQON, AD name, IP address, email

location, address, name. password

certificate, user name, password. email

target type, hostname or P address, user name, password

15. DRAG DROP

Refer to the exhibit.

Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used

16. A network architect wants to propose a scalable network monitoring solution in which data is repeatedly acquired from network devices. The solution must use a push model and provide close to realtime access to operational data .

Which technology must be used to meet these requirements?

streaming telemetry

logging

SNMPv3

CLI-based scripting

17. An engineer needs to make an XML backup of Cisco UCS Manager The backup should be transferred using an authenticated and encrypted tunnel and it should contain all system and service profiles configuration.

Which command must be implemented to meet these requirements?

Option A

Option B

Option C

Option D

18. Refer to the exhibit.

An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails.

Which action accomplishes this objective?

Set the pinning max-links value to 8

Statically assign each host interface to a fabric uplink

Change the supported FEX type

Configure the eight uplinks in a port channel

19. A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings .

Which two privileges must be granted to the employee to complete the task? (Choose two.)

Service Profile Compute (Is-compute)

Ext LAN Config (ext-lan-security)

Service Profile Network Policy (Is-network-policy)

Service Profile Config (Is-config)

Ext LAN Policy (ext-lan-policy)

20. An administrator is implementing DCNM so that events are triggered when monitored traffic exceeds the configured present utilization threshold. The requirement is to configuration a maximum limit of 39860437 bytes that applies directly to the statistics collected as a ratio of the total link capacity .

Which DCNM performance monitoring configuration parameter must be implemented to achieve this result?

Absolution Values

Baseline

Utill%

Per port Monitoring

Page 3 of 3

21. Refer to the exhibit.

Which action must be taken before the maintenance policy can be committed?

Set the soft shutdown timer to a specific time.

Associate a service profile to the maintenance policy.

Set the policy to apply the change on the next reboot.

Specify a maintenance time by selecting a schedule.

22. An engineer performs a set of configuration changes for the vPC domain using Session Manager .

Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two)

write

verify

commit

checkpoint

apply

23. What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two)

If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches.

The hypervisors must be installed to Cisco FlexFlash SD cards.

If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches.

The cluster deployment type must support a mix of HDD and SS

The servers must be discovered, unassociated, and connected to each fabric interconnect.

24. A network engineer is deploying a cisco ALL-flash hyperflex solution .

Which local storage configuration is required for the operating system and persistent logging?

Two solid state drives

Two SATA drives

One SATA drive

One solid state drive

25. Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nexus 7000 series switch is deployed?

NX-API

LLDP

Open Agent Container

Bash shell