Free CompTIA A+ Core 1 220-1101 Sample Questions and Answers

test2022-08-08T08:35:33+00:00

By test 220-1101 free dumps, 220-1101 Sample Questions and Answers, 220-1101 study guide, 220-1102 practice exam, CompTIA A+ 220-1101 dumps, CompTIA A+ Core 1 0 Comments

220-1101 CompTIA A+ Certification Core 1 exam is one of the required exams to achieve your CompTIA A+ Certification. The most recent 220-1101 exam questions and answers are available here. FreeTestShare CompTIA A+ Core 1 220-1101 Sample Questions and Answers are based on the most recent exam objectives and are 100% guaranteed to help you pass your exam. With real 220-1101 questions and answers, you can learn about the exam topics and pattern fast to better adapt to the exam environment. CompTIA A+ Core 1 220-1101 Sample Questions and Answers are designed to ensure memorable success in your final exam.

To help you prepare for the exam, take a free 220-1101 practice test.

Page 1 of 2

1. A technician is upgrading a legacy wireless router for a home user. After installing the new router and configuring the SSID to be the same, none of the devices will connect to the network.

Which of the following should the technician check NEXT?

OHCP pool configuration

MAC filtering list

Wireless protocol settings

ONS servers

2. A user contacts the help desk in reference to a failing thumbprint scanner. The user states the scanner was functioning correctly yesterday.

Which of the following troubleshooting steps should be performed FIRST after the ticket has been filed?

Inquire about possible changes.

File a damage report.

Requisition a new scanner.

Attempt to clean the scanner.

3. A user's computer is not receiving a network connection. The technician confirms that the connection seems to be down and looks for the user's port on the patch panel. The port and patch panel are not labeled.

Which of the following network tools should the technician use to identify the port?

Network tap

Punchdown tool

Toner probe

Crimper

4. A user connects a smartphone to a laptop.

Which of the following types of networks has the user created?

PAN

MAN

WLAN

LAN

5. While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is extremely polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel.

Which of the following is the MOST likely reason for this issue?

The channel is reserved for licensed band use.

The channel selection is defective; contact the manufacturer.

The channel must be unlocked by the vendor.

The device requires a firmware update to unlock the channel.

6. A user in a medical office contacts a technician regarding a printer that is used to print A4-sized labels. After the labels are printed, they mistakenly contain white space in the middle of the page.

Which of the following would MOST likely be the cause?

Contaminated fuser

Worn rollers

A misfeed

Page orientation

7. A customer is using a satellite internet connection that is experiencing slowness. A technician notices high latency while pinging, but the download test is performing perfectly with very good download speeds.

Which of the following represents the NEXT action the technician should perform?

Restart the modem and run an online internet connection and speed diagnostic tool.

Guide the customer on how to upgrade the internet plan with the provider in order to improve latency.

Explain to the customer this is not an issue; this situation is normal for this type of internet connection.

Replace the modem because it is not working correctly based on the test result.

8. A technician is setting up a new desktop computer and will be installing the hard drive directly on the motherboard without using cables to connect it.

Which of the following will the technician be installing?

Thunderbolt

eSATA

SCSI

9. A technician needs to recommend an internet connection for a customer who travels around the world and wants to have connectivity while visiting remote camping locations. Some of the locations the customer visits have limited or unreliable cellular service.

Which of the following connection types should the technician recommend?

Satellite

DSL

Fiber

Hotspot

10. A technician needs to fix a Cat 5 cable issue. The cable, which is connected to a network jack, fails when it is moved around.

Which of the following items must the technician use to fix the issue? (Select TWO).

Scissors

Network tap

Magnetized screwdriver

Tone generator

RJ45 connector

Crimper

Page 2 of 2

11. Which of the following components enables the input on a mobile device's touch screen?

OLED

Digitizer

Inverter

CMOS sensor

12. An IT manager discovered that hundreds of pages of printed materials are being recycled each day because the materials are left on the printer tray instead of being picked up by users.

Which of the following would BEST prevent this waste?

Send friendly reminders to not print unnecessarily.

Enable duplex printing to reduce paper utilization.

Bill each department for the excess material cost.

Require a code or badge before releasing a print job.

13. Which of the following technologies can allow multiple networks to traverse a switch?

VLAN

VRRP

VPN

DHCP

14. An organization is looking to upgrade the processing ability for its computers. Most users report that whenever multiple applications are being utilized, the system's response time slows down drastically. When only one application is open, the response time is acceptable.

Which of the following should be upgraded FIRST?

SSD

CPU

HDD

RAM

15. A technician identified an issue on a workstation, obtained details from the user, and made a backup of the system.

Which of the following should the technician do NEXT?

Determine the next steps to resolve the issue and document it.

Design a plan of action to resolve the issue and implement the solution.

Document the findings, actions, and outcomes.

Establish a theory of probable cause, researching internally or externally as needed.

16. A technician needs to add storage to a workstation. The workstation does not have room to add any internal storage, so the technician plans to add an external storage device.

Which of the following connection types should the technician MOST likely use?

SCSI

eSATA

PCIe

NVMe

17. Which of the following is a valid use for PaaS?

Off-site backups

An application development environment

A virtual server installation and configuration model

A web application for asset management

18. A technician unboxed a new computer, plugged it in to a UPS. and connected the requested peripherals. The computer lights and fans turn on, but the technician hears three loud, consecutive beeps during boot.

Which of the following actions will remediate the issue?

Replacing the power supply

Replacing the UPS

Changing the CMOS battery

Reseating the RAM

19. An organization maintains various record types, including health and criminal justice records.

Which of the following cloud environments is the organization MOST likely to use to limit the attack surface?

Public

Hybrid

Community

Private

20. A small ISP has hired a new technician Joe, the new technician, is being trained to configure customers* home networks. The trailing instructor gives me technician a starter kit with cables, cable ends, and other network equipment and asks mm to build a working network.

The computer should be connected to have internet connectivity and the phone should be connected to have a dial tone.

INSTRUCTIONS

Use the appropriate cables. cable ends, tools and equipment to configure the network ana connect an components accordingly

There are 3 steps and the simulation starts on step 1.