2022 Update DELL EMC DES-1241 Practice Exam Questions and Answers

test2021-12-30T03:40:54+00:00

By test DES-1241 practice exam questions, DES-1241 questions and answers, PowerStore, Specialist – Platform Engineer 0 Comments

DES-1241 exam is a qualifying exam for the Specialist – Platform Engineer, PowerStore (DCS-PE) track. This exam focuses on installing and maintaining PowerStore storage arrays in open systems environments. The exam covers installation, cabling, maintenance, upgrades and basic troubleshooting.

Do you intend to obtain DES-1241 certification?The DES-1241 practice test has been updated to reflect the most recent version of the Specialist – Platform Engineer, PowerStore exam. FreeTestShare DES-1241 practice questions and answers is considerably more effective in familiarizing yourself with the format and type of DES-1241 exam paper. This free practice test can now be used to assess your preparation.

Page 1 of 3

1. Refer to the exhibit.

What type of cable is used for the ToR switch configuration shown for the S5248F-ON switches?

10 GigE Cat 6 Ethernet RJ-45

25 GigE Twinax

100 GigE QSFP28

10 GigE SFP optical cable

2. What is the maximum number of base enclosures in a cluster when planning a Dell EMC PowerStore T installation?

3. What is the default log collection schedule?

Weekly

As scheduled during install

Hourly

Daily

4. During Dell EMC PowerStore startup, both appliance nodes have rebooted in service mode.

What must be done first to avoid management software conflicts?

Reboot node B

Clear the boot mode

Disable node B boot mode

Return node A to normal mode

5. A Storage Administrator notices a Critical alert present in Dell EMC PowerStore Manager relating to data integrity.

What action within the alert details slide-out panel is helpful in troubleshooting the problem?

Select the Gather Support Materials from Service and Support

Access the Repair Flow link to schedule a support engagement

Examine Notifications to obtain a list of corrective actions

Re-engage support through previous listed Related Events

6. A Storage Administrator notices two fans in a Dell EMC PowerStore are faulted.

What describes the system behavior in this circumstance?

A five-minute timer starts upon the second fan fault and the system shuts down automatically after the timer expires

CPU clock speed is reduced by 50% to lower internal temperatures and the system continues normal operations

An increased fan speed signal is sent to the surviving fans and the system continues normal operations

Upon the second fan fault, all host I/O is terminated immediately and the PowerStore goes through the halt and vault process and shuts down

7. In an unpopulated rack, at what U mark is the base enclosure racked?

8. How is a defective DIMM displayed in Dell EMC PowerStore Manager?

Orange with an empty state

Blue with a faulted state

Orange with a faulted state

Blue with an empty state

9. What is the result of setting a VLAN ID of 0 on a network when running ICW for Dell EMC PowerStore?

Network will pass tagged traffic

Static route is set

Network will pass untagged traffic

Default route is set

10. Which network traffic is encrypted using IPsec?

OOB network

ICD network

Inter-node network

ICM network

Page 2 of 3

11. How can the PUHC health check results be viewed?

By accessing the Swagger UI

From syslog server

In Details of Appliances and Nodes

From management DB

12. Which Dell EMC PowerStore model reserves the last two slots of the base enclosure for NVMe NVRAM?

3000

5000

7000

9000

13. What is achieved when the Rapid Spanning Tree Protocol (RSTP) is enabled on a Dell EMC PowerStore network configuration?

Redundant connectivity between data switches

Communication between data switches and management switch on PowerStore T

Management between appliance and vCenter on PowerStore X

Fault tolerance between appliances in a PowerStore cluster

14. DRAG DROP

Order the steps to prepare for an NDU process.

15. Which account credentials are needed to run diagnostic commands?

root

service

console

admin

16. Refer to the exhibit.

A Storage Administrator is troubleshooting a Dell EMC PowerStore T hardware issue. They observe that the base enclosure LED circled is blue.

What does this indicate?

Base enclosure hardware is operating normally

Base enclosure has a component hardware fault

Cluster has only a single appliance

Appliance has a node in service mode

17. Which formats are available to list alerts?

Standard, NVP, CSV and JSON

Table, XLS, CSV and JSON

Table, NVP, CSV and XLS

Table, NVP, CSV and JSON

18. Through which network do external hosts connect to the cluster for data access?

Management

ICM

ICD

Storage

19. 1.How many nodes are in the base enclosure?

2 nodes configured as Active-Standby

1 node with duel connectivity

1 node with high availability enabled

2 nodes configured as Active-Active

20. What describes the power requirements for Dell EMC PowerStore?

Lower model numbered systems require less AC line current than higher model numbered systems

T models require less total power than X models

X models require less total power than T models

Lower model numbered systems require less input voltage (VAC) than higher model numbered systems

Page 3 of 3

21. Which number in the code-naming schema represents a beta distribution?

22. What is the reason for the best practice of leaving 2 Us of space at the bottom of the rack when racking Dell EMC PowerStore systems?

Provide better rack stability

Provide cooling air intake

Leave room for serviceability

Leave clearance for wheel roll

23. What does the command “svc_journalctl -f -g “st_io_monitor”” do?

Retrieves log messages from the specified error and watches for re-occurrence

Ignores log messages from the specified error and re-occurring errors

Rotates the log based on the specified error

Deletes all logs before the specified error